Thank you to all who sent responses. Vladimir Terziev pointed out anoracle bug 4516865 that implies a problem with permissions foreverything under ORACLE_HOME. A few other people suggested thatchanging the permissions on the ORACLE_HOME files to 755 shouldn't be aproblem.After discussing ...

Hi Gurus I have a slight issue with our SunRay terminals keyboardmappings. It appears that they've always had their " and @ keystransposed. The windows terminal server has correct regional/keyboardsettings, and when I log into the solaris server directly it also hascorrect ...

Hi Managers,I was wondering if anyone had a setup for the x2100 or x2200 (in relating togrub and user interface output) that would send output to the serial port andprovide GRUB menu output to the KVM thus allowing someone who hooked up a KVMto boot a kernel that would display to KVM? I want ...

I will be out of the office starting 08/13/2007 and will not return until08/27/2007.I will respond to your message when I return.--"NOTICE: The information contained in this electronic mail transmission isintended by Convergys Corporation for the use of the named individual orentity to ...

Hi, Is there a way to list all of the files in a directory within a given range of date or just a specific date? For instance,# ls -ltr /tmp ................ -rw-rw-r-- 1 root sys 5080 Jun 25 14:10 ps_data drwx------ 2 root root 182 Jun 25 14:10 ...

Hello Everyone,We have recently acquired a Sun Fire T1000 'box.But I note the fans are exremely noisy, and there doesn't appear to be any way of controlling them.I have explored the options in the system cobnnsole managemant utility but all I can find is the current fan status - and no ...

Hi all,I have a system that I need to reinstall and the disks in the machine were previously used with full disk zfs partitions. Now I need to restore a normal VTOC so the installer can install Solaris on the disk, however this seems to not be possible. A disk format didn't change anything, ...

Thanks to Richard S. who answered immediately and got me on track again:run:-format -ethen:-Format > label[0] SMI label[1] EFI labelSelect SMI ;-)On Tuesday 14 August 2007, Markus Mayer wrote:> Hi all,>> I have a system that I need to reinstall and the disks in the machine were> ...

Dear Managers,the following issue deals with the Sunstoredge 3310. I have followingraid configuration on my Sun Storedge:Ch Id Size Speed LD Status IDsRev------------------------------------------------------------------------------- 0 8 68.37GB 160MB ld0 ONLINE ...

Hello,I think I know the answer to this, but not sure, I think I did this severalyears ago... I am working on a project to replace disks attached to a hostwith disks attached to another array.. .so, i'm going to get the newstorage(luns) connected, into veritas and mirror my volumes to the ...

hiI'm sharing out my cdrom on my windows box via cgywinfor solaris 9 boxes to nfs mount. I can mount ( mount ip:/cygdrive/i /cd) and see it fine but it sees it incapitals and shortnames - eg.# lsCOMPANIO CONTENT_ DOCUMENT FR_SERVI REPCA RR_MOVED UPGRADE_I'm thinking i'm missing an ...

How can I check and disable an rsh server on solaris 10?<p># svcs -p rsh<br>svcs: Pattern 'rsh' doesn't match any instances<br>STATE STIME FMRI<br># svcadm disable rsh<br>svcadm: Pattern 'rsh' doesn't match any instances<p>Thanks.<br>Dave Martini<br>LLNL

Looks like rsh server is part of shell so I ran this<p># svcadm disable svc:/network/shell:default<p>and it took care of it.<p>Thanks to everyone who replied.<p>Dave.

Guys,Some answers referring to the link http://techpubs.sgi.com/library/tpl/cgi-bin/getdoc.cgi?coll=0650&db=relnotes&fname=/usr/relnotes/raidI opened a ticket at EMC and SUN to check the Clarion CX400 logs and the host messages.Both didn't report any issue.I will wait for another ...

Thank you Darren.I added this line to my menu.lst file:-B console=keyboardadded it here in the file#---------- ADDED BY ME ----------title Keyboard Video Mouse: Solaris 10 6/06 s10x_u2wos_09a X86root (hd0,0,a)kernel /platform/i86pc/multiboot -B console=keyboardmodule ...

One of $WORK's customers had a Netra 440 that became unreachable overthe network. Upon accessing the console via the ALOM, they found itgiving them a "debug:" prompt. The only reference I can find to thisis in the Sun Managers ...

My original question is included below.Unfortunately, I have not found the answer to our V445's~ 4 minute boot pause. I should have noted that the systemPROM revisions are up-to-date (4.22.33 for both POST andOBP).Suggestions included: - ensuring that the system is doing minimal ...

Hello managers,I have a Silicon Image ATA controller, and sol10 SPARC.The ata disks (Samsung 250GB) is looking only 128GB with uata driver. Thisdirev isn't support 48 bits LBA?The controller is supporting the large disks, from windows looks like fine.What can i do?I forget using these disks ...

Greetings, In Solaris 10, I created some zones and even though I was logged in as root when I attempted to do some ifconfig and route command it gave me, insufficient privilege. So I recreated the zone with limitpriv=all then during verify it failed wit dtrace_kernel not ...

BismillahirRehmanirRahimHi Admin,We have a Server in our Private LAN, we assigned Pvt IP to it.Its required to connect to this Server from other Public IP Servers,so we did the NATING for this.The problem is that when we did connectivity Test we are unable toconnect to this Server from other ...

Hi All, Is there a way to convert zfs filesystem to ufs filesystem. We<br>need this to take backup since backup software fails on zfs. thanks in<br>advance. Server detailsE420RSolaris 10

Hi SunManagers,I am finding problem in Solaris 10.While installing solaris 10 x86 in dell machine through vmware esx server 3.0 its rebooting before completing installation.when ever 1st cd goes up 10 % installation its asking continue or pause to reboot system.Help me to shortout the ...

Is it possible to determine what is sending ICMP requests??

Hello All,I need to find a way to automate the process of changing the root password on several Sun DS 5.2 servers. The requirements are to update a single file on a central server or run a single script from a central server that will change the DS root password. Please note this is not to ...

Hi all,While playing with my dis*ass*ster recovery I found out that I don't need abunch of packages on my e4500.Playing for a while I found out a recipe I'd like to share with you forgenerating a list of packages thatyou'd like removed from the installation.1. Go to the dir that contains the ...

Greetings from Mexico City...I have 3 questions and I really hope you can help me:Question 1: I backup several files using tar. How can I restore an specific file from that tar backup?Question 2: Is there posible using crontab when crontab -e doesn't work?Question 3: Is there a Procedure to ...

Dear All,I m doing encapusulation on a T2000 server with Veritas 4.1 and during thesecond reboot of the server, it goes tomaintenance mode(Single user mode).Below is the error message from console. Any solutionsHostname: ********WARNING: /pci at 7c0/pci at 0/pci at 1/pci at 0,2/SUNW,emlxs at ...

Archive-name: codeprof-faq$Id: faq.html,v 1.29 2007/05/25 20:41:16 jdd Exp $ SunManagers Frequently Asked Questions This is collection of common questions posted to the codeprof mailing list twice a month. It is intended to benefit Sun System Managers and reduce traffic to the list by ...

As the subject says, I'd like to configure replication betweentwo Sun Java Directory Servers, version 5.2. All of the Sundocs tell you how to do it from the Sun Java Console, butthese systems don't have all of that set up. Anyone havecookbook instructions on how to get replication going ...

Hello,The 'netstat -an' command will show me that processes are using certainnetwork ports. E.g. 'netstat -an | grep 53' will show me that a DNS nameserver is running: 127.0.0.1.53 Idle 192.168.177.1.53 Idle 192.168.177.1.53 *.* 0 0 49152 0 ...

Gurus We are trying to install a jumpstart version of Solaris 9 from theoriginal distro pack and also the downloaded .iso file.We are having an issue with the setup_install_server script as it triesto find the boot image at /cdrom/sol_9_904_sparc/Solaris_9/Tools/Boot.This is a link which ...

Dear Managers,the following issue deals with the Sunstoredge 3310. I have following raidconfiguration on my Sun Storedge:Ch Id Size Speed LD Status IDs Rev----------------------------------0 8 68.37GB 160MB ld0 ONLINE FUJITSU MAT3073N SUN72G0602 S/N 000515B03GYR0 9 68.37GB 160MB ld0 ONLINE ...

I have 3 zones installed on 3 different ZFS file systems. The filesystem is not supposed to be read-only but whenever I try to modify thehttpd.conf is says it is read-only for root. root at blogs # zfs get rdonly zpool1/zones/media-zone NAME PROPERTY VALUE SOURCE ...

Hi all,We're currently looking for someone to work a 1-2 month contract inMiami, Florida. The following bullet points provide the raw details ofthe job requirements. Please contact me if you are interested in theposition. Please include your pay requirement. Thank you.Regards,Eric ...

Hello, I am trying to figure out this problem. When I log into a SUN machine running Solaris 8 using CDE It looks as if it wants to log in, I get the white screen and then it goes back to the login page. I have tried users and root and no difference. I have deleted the .dt directory and ...

Hi Gurus,I have setup a Solaris 10 Jumpstart Server and was trying to jumpstartclient but it goes to the interactive mode. I checked sysidcfg and looksfine. Also did snoop on the client. It does give "no such file or directoryerror" not sure for what though.In the log below app5 is ...

And, yeah, the file should be, IMO, writeable but vi reports: "httpd.conf" [Read only] 462 lines, 16154 characters root at blogs # ls -l httpd.conf -rw-r--r-- 1 bin bin 16154 Jun 9 httpd.conf root at blogs # chmod +w httpd.conf chmod: WARNING: can't change ...

More clues:root at blogs # ls -v httpd.conf-rw-r--r-- 1 bin bin 16154 Jun 9 03:06 httpd.conf 0:user::rw- 1:group::r-- #effective:r-- 2:mask:r-- 3:other:r--root at blogs # chown root httpd.conf chown: httpd.conf: Read-only file systemOn Fri, ...

Okay, based on the info you guys gave me - I backed off the ZFS OSinstall. I created a UFS partition for the zones. Now I need to mounta ZFS (zpool1/media) under /usr/local/appache2/htdocs and it won't letme.NAME USED AVAIL REFER MOUNTPOINTzpool1 329K 16.9T 40.1K ...

Dear Managers,I am trying to migrate the two node SUN cluster shared storage from oneEMC box to another EMC ( New DMX) box. I prefer to add new DMX disksto the existing shared storage disk group and do the veritas levelmirroring volume by volume. Once the mirroring is completed 100% I ...

Hi all!I've got an Oracle forms compilation on an e4500 with Solaris 10 u3, 14cpus8mb cache each that I'd like tospread on multiple processors, because the compilation binds to 1 CPU and400mhz is on always enough.I've read http://docs.sun.com/app/docs/doc/817-1592 ...

Hello Managers,Thanks very much for your rapid response. I got replay from Graeme andMartin. Thanks a lot. I appreciate your time and help. To summarize!!Problem Reported:I am trying to migrate the two node SUN cluster shared storage from oneEMC box to another EMC ( New DMX) box. I ...

Can someone tell me how I can add a static arp entry? This will be needed<br>when the server is rebooted.<p>Thanks

I have 5 disks in a RAID 0 (stripe/concat) configuration under SolsticeDiskSuite. One is going bad (1 hard error, soft errors clocking up 2 or 3a day) As you can see the system isn't mirrored, so if I'm not carefulI'll have to do a full restore of all the data, tedious.The system is under ...

Hello there: Have about 4 Services under Sun Cluster services, these aremainly Java commands built by scdsbuilder. Only one of the those 4 isn'tworking i.e. scswtich -e -j <resource_name> command doesn't do anything forthat one particular command.... have looked at almost ...

Dear Sunmanagers,I have a server kept in remote location where i dont have a system admin tocheck the cabling physically.Is there any command in Solaris to get the NIC's connected to the networkI m sure that the server is having qfe0-qfe3.Network cable is connected to one of this interface and ...

Dear Managers,I'm very close to getting my JS up and running.My image was created from the Solaris 8 Software HW 5/03 1of 2 disk.#pwd/cdrom/sol_8_hw503_sparc/s0/Solaris_8/Tools#./setup_install_server /mountpoint/d2(no errors generated)I'm not sure if I need to use that disk (above) or the ...

hi!do you know, who I can see the message buffer when debugging a core filewith mdb using solaris 10 ?I have core files from a solaris 9 box, trying the mdb on another solaris9 box, it works as usual:# mdb 0mdb: warning: dump is from SunOS 5.9 Generic_118558-27; dcmds and macrosmay not match ...

Hello: We have an admin who is running Mecury LoadRunner. One part of it generatesload to our Solaris 10 Web and Application servers (SPARC), and the othercollectsperformance statistics via the Solaris RPC "rstatd" interface. Now, randomly, and independent of the load placed on the ...

HiI am seeing incorrect disk space usage on my database servers. Theoracle installation and binary directory is creating the issue here./dev/vx/dsk/oracle 22503424 20179202 2181510 91% /oracle...... du -sk on /oracle returns only 6G.That being said, I cannot find the process which is ...