All -Thanks for all the responses to this issue. It turned out the issue wasa improperly configured nsswitch.conf file. The server don't use DNSand both files, dns were set in this file.Ray VecchiarelliManager, Engineering and Support______________________________________Air-Transport IT ...

Hi,When I am running remote shell command form HP-UX to Solaris I amgetting permission denied, any solution for this issue. # remsh pkgd020p -l exposx -n hpp_get_sxdata.prg permission deniedThanksUma Maheswar-----Original Message-----From: codeprof-bounces at ...

I just use a old PC with Windows and Hyperterminal using a serialconnection and everything is perfect!Thanks!-------------------------------------------------Hi guys,I'm very new to solaris, and we just buy 6 enterprise 420 servers. ButI have a simple and easy question, can I use any dumb ...

I'm running Solaris 10, and openssh seems to be impervious to projectresource management. Here's what I have:-------------------------------------------------------------------------------{oraserver}# uname -aSunOS arl-fratm-stats 5.10 Generic_125100-10 sun4u ...

Thanks to Bryan and Matthew for their answers!Setting either "UseLogin yes" or "UsePAM yes" in my sshd_config did thetrick. However, enabling UseLogin results in X11Forwarding beingdisabled (which I need to keep enabled), so I went with "UsePAM ...

We inherited a sun box, complete with application a long time ago.My involvement as "system admin" was/is/has been limited to -get an email similar to thisFailures have been detected by the VERITAS Volume Manager:failed disks: disk16failed ...

Hi Gurus,Could someone please help with a small problem with NIC:I have a SUN v120 with the 2 NIC configured as:bash-2.05# ifconfig -alo0: flags=1000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4> mtu 8232 index 1 inet 127.0.0.1 netmask ff000000eri0: ...

When I try to use Hyper Terminal from my laptop to connect to severaldifferent E420Rs, I get no output on Hyperterm.I'm using a blue Cisco rolled cable with DB-9 on one end and RJ-45 on theother. The E420Rs all have silver DB-25/RJ-45 adapters in their TTYA portsand openboot shows ttya-mode is ...

Don Radliff nailed it on the head when he said: Hi Jason, i think you need to use a straight thru ethernet cableinstead of the cisco one..I forgot I could use a straight through ethernet cable with the correctadaptersin lieu of a serial/null modem cable. The adapters I used were:Silver ...

Dear all,I have enabled rlogin/login/shell services on solaris 10 and have created a.rhosts with +. When trying to rsh i get the following error.Jul 24 15:26:22 jupiter in.rshd[1663]: [ID 808958 daemon.warning] refusedconnect from earth.myworld.com (access denied)Jul 24 15:26:22 jupiter ...

I'm trying to build some source code from a linux under Solaris. Part of the "make" fails because it can't find /bin/sh.I'm not asking for anyone to solve this specific problem, but if anyone has encountered this issue and has a general work around please share.Many ...

Hi,Got a v490 (Solaris 5.9 118558-39) running Veritas Foundation Suite 4.1 plusOracle 9.2 which is showing very high kernel usage levels (50% upwards) forwhat appears to be relatively little work. The system isn't paging heavily andnetwork levels are also not significant. Volumes are RAID10 on ...

Gurus, I need to install sudo on several production/UAT servers in the environment. All are Solaris 8/9 based. I googled to find that sudo is a freeware and can be downloaded from http://www.courtesan.com/sudo/download.html or from sunfreeware. I know for sure Sudo is used ...

Hi Gurus,<p>Could you please tell me whether the ufsdump is copying tha data block by<br>block or not?<p>Regards,<p>Asiye

what are my options?

Hi i have installed solaris 10 in x86 machine ,in which i already havewindows 2000 OS Running.Now ,when i login in WINDOWS i am able to connect to internet .But when i login in SOLARIS i am unble to cennect internet,this is because iam unable to assign IP ADDRESS to it.Only *lo0* interface ...

Hi<p>Is mii-tool for Solaris available ?, if it is available please give me<br>the source web link.<p>Thanks<p>Uma Maheswar

Hi,The firmware update of my A1000 controller board failed during the upload ofthe "appware" file (the "bootware" file download terminated correctly). Iwas upgrading from version 2.05.xx to version 3.01.02.35 using theRaidManager 6.22 installed on a Sun Fire V480 host ...

First, this network is badly broken, that much I already know...however.Seeing if there is a host based solution for my Sol 10 host "Server A".Two hostsServer A ce0 is on 192.168.0.2 ce1 is on 172.16.0.2Client B eth0 is on 192.168.0.5Connect from Client B to ...

Was reading the release notes in Sun Cluster 3.2 and noticed you don't need<br>a shared quorum disk like you did in 3.1.<p>Has anybody used this method in a 2 cluster node?<br>Does it perform better than the old quorum device on shared storage?<p>Thanks

Dear Sungurus,I tried to deport and import the veritas volume in adiff server, now i am not able to import the DG and itgives a error "Plex is unuable", any help to recoverthe data would be great.zin03vob:/ [\>] vxdisk listDEVICE TYPE DISK GROUP ...

Original Request: Solaris 10 - Source routing First, this network is badly broken, that much I already know...however.Seeing if there is a host based solution for my Sol 10 host "Server A".Two hostsServer A ce0 is on 192.168.0.2 ce1 is on 172.16.0.2Client B ...

Hi all,i try to have my Solaris 10 machine authenticate passwords against a WindowsActive Directory.I correclty (at least i think it is as same is working on Solaris 8, Linux)set up krb5.conf and pam.confbut it is not working.In /var/adm/messages i always get:Jul 26 22:01:29 sitom5 sshd[12472]: ...

Hi fellow managers!Has anyone inserted plain x86 PCI cards into a PCI I/O board of an e4500?Docs of PCI voltage riser card say that PCI card should be able to speakJTAG so that the I/O board can be seen at all.However my mux (Digi Acceleport 2p) doesn't according to the manufacturer.Could ...

All,<p>I am having trouble finding out how to allow a range of ip addresses in<br>my hosts.allow file. I need the range 192.168.1.20 - 192.168.1.63<br>allowed for ssh only.<p>Thank You

Got an 880 with Solaris 9 that's been running on 10/100 for over a year.<p>I plan on shutting down the server, and replacing it with a 1gig feed.<p>Do I need to change anything on the server or should it auto detect the <br>faster speeds?<p>Many Thanks<p>Steve

Hi Everyone,I'm running a fully patched Solaris 10 11/06 box andseem to have run into a bug relating to the SolarisManagement Console and a crypt method other thandefault.What I did was change the crypt method in/etc/security/policy.conf and then change my passwordto take advantage of the new ...

> Hi,>> I have a Sun Enterprize 250 with OS 5.6. This morning I tried to> reboot it and started getting error -> 'WARNING: /usr/sbin/fsck not found most likely the mount of /usr> failed or the /usr file system is badly damaged....>> I tried to boot using CDROM (boot ...

Thank you for the responses.Basically you have to do tagging of packets for something like this towork. I wasn't sure if with all the changes in Fire Engine if maybethis was possible now. it isn't, at least not in any practical sensethat I would implement.On 7/26/07, Chris <kingsqueak at ...

HiWe have a handful x4100 systems running at 1000/fullWe have seen that the network interface sometimes drops under loadYou just see the interface come back up in the messages file:Jul 27 15:25:57 fnet-fred1 e1000g: [ID 801593 kern.notice] NOTICE:pci8086,1011 - e1000g[0] : Adapter 1000Mbps full ...

Hello All,Thank you for all your help. I had over 20 replies on this one.The conclusion to this problem is that when the server boots up it uses thefirst nic by default. the only way the 2nd nic(on the same network segment) is activated is by administratively shuttingdown the 1st int.The whole ...

Hello allI'm trying to configure a v120 (sol8) as router. The exact setup is:2900 switch||eri0 eri1 (*node1* v120 sol8) | | eri0 (*node2* v120 sol8)from node 1: I can ping eri0 on node2 & 2900from node2: I can ping eri0 + eri1 on ...

Hi allWe had this error come up on a few v210/v240 boxes running Solaris 10(Generic_118833-17) a while back and It is now starting to happen onmore and more boxes and id really like to get to the bottom of it "[ID 257829 kern.warning] WARNING: interrupt 0xNNN at level 4 ...

Gurus, Any good document on how to set up sftp server on Sol 9? I googled unsuccessfully to find out a good document narrating the procedure. Thanks Ketan ---------------------------------Fussy? Opinionated? Impossible to please? Perfect. Join Yahoo!'s user panel and lay it on ...

HiI installed send mail on a HP-UX every thing looks fine, I am able tosend mails but I am unable to received.I am able to do telnet to port 25 on locahost, when I do same thing fromremote host I failed, but I am able to telnet 110 and 143.When I am sending mail to a particular user it is ...

Hi,I need to import a lun with existing data on a Sun box with Solaris 8and Sun Volume Manager (Disksuite).This box is connected to an Ibm SVC (San Volume Controller) with flashcopy functionality.Goal is to make a flashcopy of a vdisk (on the production server, alsoSun, Solaris 8 with ...

Hi,My Sun Enterprize 250 has crashed and require OS re-installation. I amable to boot using CD as single user. I am able to see the files presentwhich I need.Can any one help me on how to take backup?The server doesn't have Tape drive. There is only a read-only CD drive.Looking for ...

Has anyone had success in getting ssh key based authentication to work after switching to pam_ldap?We are using Sun One server 5.2p4, and I'm testing with a Solaris 10 client at 118833-36, which is supposed to have the latest ldap client patches rolled in.We are getting mixed messages from Sun ...

Hi all,I've been pulling my hair out over this one since friday, and still haven't found why it doesn't work.I am trying to configure IPMP on two V445's with Solaris 10 11/06 with all the latest patches up until today. I have 8 interfaces on each machine, 4 fibre (e1000g0-3), 4 copper ...

Gurus,V490+Solaris 9,On a 79GBytes file system "/usr/local", where thereare2 5GBytes free, system fails tocreate a 1GBytes file via mkfile:# df -h /usr/localFilesystem size used avail capacity Mounted on/dev/dsk/c1t1d0s6 79G 53G 25G 69% /usr/local# cd ...

Hi,I have 2 Sun Ultra 10 serves and i have added a KVM to manage themtogether with a Sun Fire V880 and a Sun Fire V250. The former ones usetraditional Sun Keyboard and mouse (PS2-alike) and the later ones useusb Sun keyboard and mouse.I had previously a KVM wich admited the old style Sun ...

I need to power off our V880 this Saturday at 7am<p>Obviously I'd prefer to be at home in bed. ;-)<p>Is there a simple enough way of putting this in the root cron?<p>Many Thanks<p>Steve

Hi AllSorry, off topic, but just wondered if anyone had the image software to reinstall the Guardian OS onto a Snap server I have. The disks are all blank and I cannot get the CD images from the Adaptec website/ftp?I want to use with my Sun systems as an FTP/NFS/iSCSI ...

Thanks for the responses from Pascal G, Don R, John H, Matthew T, and Glenn P.Pascal was the first onto my main problem - the files really are called "hostname.e1000g0", and not <hostname>.<device name> as I originally interpreted. Seems like I was thinking too much ...

Here's one for the books.Got a veritas disk group on a running server, everything happy. We make atuning change to /etc/system and reboot. When the machine restarts one of thedisks in the disk group fails.On close inspection it appears to have been relabelled as a system disk duringthe ...

I would lie to tip from a T1 to a v120 it has both ALOM and serial ports<br>available.....<p>What is the best solution?<br>Can I have a straight through network cable plugged into both serial ports<br>and then tip?<p>Thanks

I will be out of the office starting 08/01/2007 and will not return until<br>08/02/2007.<p>Any issues, please email to <A HREF="/execute/ask/?codeinfoid=44152">sga.notes at seagate.com.</A> I will respond to your<br>email when I'm back, if required. Thanks & Have A Nice Day!

Dear managers,I have a script that basically does /usr/sbin/mount -F nfs 192.168.1.230:/home /home /usr/lib/netsvc/yp/ypstartThe nfs mount alone works but ypstart removes the mount again. :-(I have done pico /etc/auto_master #/home auto_home -nobrowse automount svcadm ...

Hi fellows,I got a problem with a e4500, OBP 3.2.30 and a d1000 12 disks.It cannot boot from the disks in the storage.I am able to install via network Solaris 10, disks are seen, however laternothing from disk happens.Diag switch is set to true and level is min.D1000 has been terminated in the ...

managers, I have two solaris 9 9/05 boxes recently build. One of the user is unable to ftp to one of the boxes but he can login from that box to other boxes. As a root I can login from either boxes as I commented out on /etc/ftpd/ftpusers. his account is not listed there on ftpusers. ...