Thanks to Darren Dunham for his support.Some confusion in my initial question came from wording used that istoo close to Sun's linguo for a similar but different case.Instances started through /lib/svc/method/ssh (comparable to/etc/init.d/ssh) are different than what Sun calls "service ...

hey, go here and we both get a free New Video iPod pretty pretty please :) http://www.getitfree.net/xhseevxwl http://www.getitfree.net/xhseevxwl This was sent by gkpani at yahoo.comvia GetItFree, 540 University Ave 50, Palo Alto CA 94301Visit this page ...

Hi After restarting the system the volumes doesn't mount in volume manager: The outputs are below Regards,Saif #device device mount FS fsck mountmount#to mount to fsck point type pass at bootoptions##/dev/dsk/c1d0s2 ...

Hi<p>I hv installed Sun 9 on intel I am not able to open SMC as it say display<br>prob. check the display setting .<p>how to resove this prob<p>Cheers<p>Amar<br>

I received many replies and thanks to everyone who replied. Bottom line, don't use disks from other vendors unless you cannot afford. SUN uses a specific firmware and also has stringent power, heat disspation etc... requirements for the disks used in StoreEdge 3000 series RAID arrays. You can ...

I received reply from Mr.Gary Tay and got the sameconfirmed from Sun Microsystems. Here is the answerSolaris Native ldap clients doesn't support usingalternate ports when used with TLS. Sun has plans toget this working in their future releases but thetimeframe is unknown at this point of ...

Hi,I have been struggling with this problem for a few days now but I cannot figure it out, maybe some of you can can give me some insight.I am trying to install lsof on Solaris 7. I got the source (not the package; I prefer not to install the package) form Sun Freeware.I did a configure with ...

I got one reply to this - Thanks to Nitin.Thakur at ubs.com for the suggestion in the future NOT to CHANGE settings,but just to RESET the port on the switch.(Changing settings automatically RESETs the port,and that may have been what was really needed)(Datacenter management informs me that ...

Greetings.We have been running our environments on Solaris for 12 years.We just installed our first AIX box.I got NFS working so that AIX can happily use files from our existingenvironment...and then I started thinking about NFS mounting /home on AIX....In the general case, it NFS sharing ...

Did anybody succesfully compile fcinfo from Solaris 10 for Solaris 9 (SPARC) and is willing to share the binary?According to a message on the OpenSolaris forum this should be possible but I want to avoid installing a OpenSolaris Development environment if not necessaryUnfortunately the binary ...

Hi Gurus,We are in a process of moving from SAN to NetApp NAS (NFS client) for our sendmail application on Solaris 9 with VCS 4.1 for which i am setting up dependency tree in main.cf of VCS 4.1. I found the NFS client agent from NetApp web site and installed the same. The instalaltion was ...

Hi,I was just given an Ultra Enterprise 450 with 4 processors and 3Gb ofmemory. I'd like to get NetBSD or OpenBSD running on this machine. Ihave a Type-6 keyboard and the hardware seems to work with a standardPC monitor but when I try to do the installation after boot thekeyboard becomes ...

Thanks to Torsten and Tom Lieuallen for replying -Some disk background:The T2000s come with 2 SAS internal drives 0 1 . SAS is serial attachedSCSI; like SATA serial ATA. Just remember that parallel drives send data inparallel down the EIDE ribbon; while serial is a single data path and ismuch ...

Hi all, tomorrow i have get some errors on a my production server.This is a SunOS mwsbit04 5.9 Generic_118558-22 sun4u sparcSUNW,Sun-Fire-V240 and this morning i have found unexpectedly slownessof the processes.The server have installed a iPlanet Web Server 6.1 SP4 and after thati have found ...

I've got a problem involving Solaris 10, Veritas, Oracle, and our Sun6320 SAN. I'm starting with this list because I believe the problemis down at the UFS filesystem level, with perhaps, veritas implicated.We are trying to migrate UFS filesystems on the SAN that hold oraclefrom a solaris 9 ...

All, I have 2 v490s that just came in after much waiting. I plugged it in and all I see is amber lights on both servers. What could be the problem? Any ideas Please dont refer me to sunsolve: I dont have access to it. Thanks Joe ---------------------------------Love cheap ...

Thanks to all for their suggetion. Too many to list.The solution is to use tee -aman tee-a Appends the output to the files rather than overwriting them.Another way is to use iostat -T d -xnczC thanks to Johan Hartzenberg.My Question was:>> We are having some performance ...

Hi,I ended up just copying the entire filesystem, including the quotasfile, to the newdisk on the SAN. Then I shut off the quotas, ran quotacheck, andturned quotason.Nicole>>> "Nicole Skyrca" <nskyrca at syr.edu> 5/4/2006 10:24:58 AM >>>Hello,I am upgrading ...

We're trying to configure sendmail on a machine running Solaris 9 for sending mails via an "smart" relay host (DS... in /etc/mail/sendmail.cf)The problem we have is, that sendmail trys to resolve the domain names of the target email addresses, e.g. if we send an email to bs at ...

Dear managers,I am trying to install openssl 0.9.8b on Solaris 10 x86 since another software package I am trying to install asks for this latest version. I moved the default ssl out of the way mv /usr/local/ssl /Buildand then tried to build the sources. cd /usr/src gunzip ...

Hi AllI need information on how to setup the V120 system so that I can access it remotely via LOM Prompt , I tried with command "setupnetwork" at LOM prompt as suggested in documents to set IP address through LOM prompt , but it's not setting up the IP .Thanx in advance .RegdsAmit ...

Archive-name: codeprof-before-postingLast Updated: $Id: before.posting,v 1.21 2005/12/28 21:05:10 jdd Exp $NOTE: This message is posted periodically to codeprof on behalf of all members of the Sunmanager's mailing list. Please read it carefully before posting. This document can be retrieved ...

Dear All,I have digged out an E4500 with 2 CPU cards and SCSI and fiber I/Oboards but without Hardisk board from our store room, and I have aD1000 stoarage with 12 Hard disks that I want to use with the server.At the OK prompt I do a probe-scsi-all and I can see 11 hardisks with2 processor ...

-----BEGIN PGP SIGNED MESSAGE-----Hash: SHA1Hi,We have an Oracle Installation on one of our V490s within a non-globalzone. Although this is by now the only zone where there is any seriousload produced, we have big performance problems. A benchmark, our dba,ran, showed, it was about 1/20 as ...

Guys, Sorry for the slightly off-topic post, but I couldn't get any workingsuggestion from the secureshell mailing list.I managed to get the following working: > --------------------------------------------------------------------> A firewall between SERVER and CLIENT only allows TCP ...

Good morning Managers,We are experiencing a problem with one of our new T2K servers that wejust set up. We moved from a SunFire 480 running Solaris 9 to this newT2K server. What we are experiencing is on the new T2K server, thepermissions for the NFS mounts from the NetApp filer are getting ...

Does anyone know how to find the solaris release level out from the OS?<p>Eg sol 8 02/02 on the cd's but i need to know what release the server i<br>am on was built with. It seems to make a difference on some patches.<p>I cant see it by using uptime, uname -a, prtconf, set, etc<p>Thanks<br>

I am trying to find a training course for LDAP which encompasses Solaris8 in the New York area.CONFIDENTIAL: This e-mail, including its contents and attachments, if any, areconfidential. If you are not the named recipient please notify the sender andimmediately delete it. You may not ...

Hi All,Anyone used sms_client 3.0.2 from smsclient.org ?Im trying to get the ucp_tcp config to work - but getting bad ip in theconfig.ORCan anyone suggest an opensource email_to_sms software ( with ip to smscsupport if possible ) - or similar that will pluginto postfix or other smtpserver ...

I feel stupid now....thanks toe veryone the answer us just cat<br>/etc/release.<br>

Dear All,Thanks for the great support and for sharing ideas and thoughts, andthanks to it I was able to resolve my problem.Now the setup was correct and the open boot could see the hardisks onthe storage but the OS couldn't, I wasn't noticing a parity error thatgoes by fast in the process, ...

Thanks to: Jeff C Nick B Andreas H Stan P Thank you all for those who replied, offered ideas, tips/suggestions. The power cords are plugged into 110va instead to outlet that is of 200-240vac. The RSC can get powered little amount power which provided me with loging prompt I ...

I have 7 Sunfire V440's each with 2 network connections (1 private and 1public) running Solaris 9. Two of them have had the OS reloaded and nowonly bring up the private nic on boot. They are configured the same asthe systems that bring up both interfaces so I don't know what I couldhave done ...

Morning:A Solaris 8 system with Sun StorEdge A3000+D1000s storage system. We use RM6to manage the StorEdge.A RAID 5 Group (Group 2) which consists of 5 LUNs, LUN 3 to 7. A disk wentdown. After replaced it, all LUNs completed their reconstruction. Their Statusare bOptimalb, in most of ...

Sorry I knew I was forgetting something. The interfaces are ce0 & ce1and have /etc/hostname.ce# entries that have the system names in them.------I have 7 Sunfire V440's each with 2 network connections (1 private and 1public) running Solaris 9. Two of them have had the OS reloaded and ...

I am trying to find a file(s) where I can specify the values for thefollowing items in the Solaris Operation System (version 8 - 10)* Password must contain at least 2 alphabetic characters and 1Number or Symbol* Passwords cannot be equal to Login ID or a re-arrangement of theLogin ID* New ...

Folks,I'm real green when it comes to T2000 servers and Solaris 10. I justfinished setting up 2 T2000 servers today. When they were racked andstacked in our server room, one of the power cords wasn't plugged in allthe way and it created an error event within the sc ALOM processor. ...

Hello,I've been charged with looking into monitoring solutions for a network with Solaris x86/sparc, Linux and Windows hosts. I'm trying to get a handle on what people out there use. I need to be able to monitor/alert on certain conditions and I also need to be able to track long term data ...

Thanks to Alex Stade and Musa Williams for helping me resolve thisproblem.Apparently NFSv4 is the default for Solaris 10 and NFSv4 doesn't seem toplay well with the Network Appliance frames we have. So I made thefollowing changes to the /etc/default/nfs ...

I received a few emails, but we had the luxury of shutting down thesystems and unplugging the power for about 5 minutes. We powered themup and the amber light went away.Cheers,Jim-----Original Message-----From: codeprof-bounces at codeprof.com[mailto:codeprof-bounces at codeprof.com] On Behalf ...

What's the maximum number of devices per controller I can have Solarisdiscover by updating sd.conf on Solaris 10? Currently I'm updating sd.conf aslisted below to identify devices from my SAN, but, since I'm using lots ofcontainers on a system, I need to make many devices per container that ...

Bernd Schemmer wrote:Looks like no one has done this yetMy original question was:>Did anybody succesfully compile fcinfo from Solaris 10 for Solaris 9 >(SPARC) and is willing to share the binary?>>According to a message on the OpenSolaris forum this should be possible >but I want ...

All,I've been trying without success to create a flash archive using a filelist.For example I've installed oracle and ran`# find /oracle > /tmp/filelist`now I want to create a flash archive of only the files + dirs in/tmp/filelist. I've tried using`# flarcreate -n "test" -S -c ...

Dear All,Glad to announce that I reached a resolution to my problem, I wouldlike to thank all those who replied to me and I would like toacknowledge all of them for their useful tips and insights.The problem to be more percise as I have noticed something I didn'tmention it in my mail is that ...

Hi everybody,I have a A5200 and after reading that the enclosure has a license forVXvm i tried to search for the software, but I failed to find it ...neither the license.I've gone around http://ftp.support.veritas.com/pub/support/products/and sunsolve but i did not find nothing.Any help would ...

Thanks to Bernd Schemmer who suggested I use the -I option to ignore theintegrity check - works a charm.Thanks also to Iain Miller for his suggestion.________________________________From: codeprof-bounces at codeprof.com on behalf of Rob BrownSent: Thu 5/25/2006 11:02To: codeprof at ...

Can anyone give me a command to create and write a large file to a newfilesystem, I have limited space in / so have added a large SAN drive, Iwant to test the performance but can't just copy as I have nothing ofsuitable size.RegardsPaul WhytonMTI UK customer service[demime 1.01b removed an ...

You guys are excellent, over 30 suggestions within 10 minutes....dd worked a treat for me. (dd if=/dev/zero of=/path/to/file count=50000)or words to that effectRegardsPaul WhytonMTI UK customer service________________________________From: Whyton, PaulSent: 25 May 2006 15:03To: (codeprof at ...

Thanks everyone the answer was very simple. I had added a MTU statementto the hostname file but did not explicity up the nic. As Darren Dunhampointed out once there is more than a single line hostname file you haveto add the up command as well.hostnamemtu 1400up <======= ooopsRichard W. ...

Thanks a mill to Graham Wood who hit the nail on the head.On GOOFY I had to set "AllowTcpForwarding yes" in sshd_config.CheersLoris-----Original Message-----From: Loris Serena Sent: 24 May 2006 15:21To: 'codeprof at codeprof.com'Subject: Slightly off topic | Two-hops SSH ...