Hi,Are there any SPECint2000 and SPECfp2000 results for the T2000We currently have two E250's running as ClearCase servers and I was wondering if a T2000 could replace these machines.I have included a couple of runs of cooltst.ksh v2.3.0 which were run while the ClearCase server is being used ...

Thanks for all your help with the mirror setup instructions for Solaris 10. The mirror works except when I did a test to boot up from the second disk. I'm running v210 on Solaris 10I changed in eeprom:eeprom "nvramrc=devalias rootdisk /pci at 1f,0/pci at 1/scsi at 8/disk at 0,0devalias ...

Does anyone know what would cause dmispd to go to 98%<br>/usr/lib/dmi/dmispd Can it be killed.<p>Michael Segale System Management Specialist<br>IBM Global Services<br>(201) 767-4438<br>Pager (800) 759-8888 pin 1030605<br>

It seems that there are three options: 1) use Java 1.4 with the -Djava.awt.headless=true flags 2) Xvfb (default with Solaris 9+) 3) VNCFor running with the -Djava.awt.headless=true option, there are a coupleof caveats. From a Java related page [0]: Headless operation doesn't allow use ...

hello All,apologies for not giving a better listing yesterday. basically the sunbox is connected to a SAN switch which in turn has redundant connectionsto the disk array. One connection did not work very well while I wasformatting and mkfs'ing. Hence, I got problems?. Apologies ...

Hi All,I have a SE9990 and created four 200GB cvs lun on parity group 1-1. Theseluns were used also as True Copy primary volumes and Shadowimages primaryvolumes. After creating new/faster sets of luns I wanted to do a volume tospace from the storage navigator to these luns on 1-1. I get the ...

Ok, This has been bugging me for a while. If I was to add a user using the SMCand filled out the Full Name attribute. Where is that stored? I can't seemto fine it anywhere. /etc/user_attr /etc/passwd or /etc/shadow. I know thecomments/description is stored in /etc/passwd but what about ...

Hi all, A quick question, I currently have an E3000 running Solaris 2.6. I am goingto move it to a E4500 but something just occurred to me. Currently vxvm islicensed because of the SPARC Storage Array connected to the E3000...but myE4500 has an A5000. Does having an A5000 automatically ...

Thanks, Darren.Marco. -----Original Message-----From: Darren Dunham [mailto:ddunham at taos.com] Sent: March 23, 2006 2:50 PMTo: "Marco Greene (ML)"Subject: Re: SUNWvxvm 2.5 on Solaris 2.6> > Hi all,> > A quick question, I currently have an E3000 running Solaris 2.6. I ...

Hi all,I want resize a concat/stripe soft partition with mirror, but i can not do the matattach "dx" "xM" without do a metaclear of one of submirrors of the soft partition, example:d0: d10:submirror d0 d15: soft partition d20:submirror f0 d25: soft ...

I have a Solaris 8 jumpstart server successfully providing DHCP jumpstart forSolaris 10 (sparc) clients now using the open source ISC DHCP server (notSun's). The problem wasn't my dhcpd.conf file. My problem was fixed with twothings:1) I used the Solaris 10 CDs (not DVD) to do ...

Archive-name: codeprof-before-postingLast Updated: $Id: before.posting,v 1.21 2005/12/28 21:05:10 jdd Exp $NOTE: This message is posted periodically to codeprof on behalf of all members of the Sunmanager's mailing list. Please read it carefully before posting. This document can be retrieved ...

Hello, and thanks to all who replied.I received eight replies to this, and seven of them reported the same problem on several V210's (no V240's). One person who had 5 V210's has had no problems whatsoever.One person said there was a FIN coming out on this problem.No one has had any problems ...

Hello list,I have a batch of 6 V210's with the XVR-100 product installed, duringthe o/s installation I had the display working by setting theoutput-device variable and rebooting. Everything seemed fine until wehad these racked up and in production, we are trying to use a new KVMsystem on the ...

Hi,I installed solaris10 on the first HD (c1t0d0) of y V440 Sun machine. Ithen installed solaris8 on the third HD (c1t2d0).I was surprised that solaris8 started from the first HD (instead of thethird!). From the prompt when I give "boot disk2" I get an error and thecommand "boot ...

Hi matesStill having some problems with my client box. As related in the mail I'vesent a few days ago. I need to setup a Solaris 2.5.1 Jumpstart, and patchthat jumspart to the last recommended patches for that release.The server who will contain the jumpstart server is a Solaris 9 box.The ...

Team:We rebooted a sunfire 880 yesterday and it tookanother 12 hours to bring it up..'coz when the machinecame back after the reboot at the OK prompt it couldnot even do a probe-scsi-all(just showed one disk,not even the boot disk..we then had to tAke it bootvia cdrom and rebuild the rootdisk ...

I have a SCSI multipack storage with 2 sun machines..I'd like to have both systems see the disks in thestorage..So far I changed the scsi-initiator id from 7to 5 on one of the systems, but I still cannot see thedisks from both sytems. I can not even see the diskswith probe-scsi-all command on ...

hi,i have a volume on a LUN of an EMC-storage and i need to increase thesize.i could increase the size of the LUN on the EMC, i could increase thesize of the disk for solaris, but how can i tell the veritas volumemanager that the disk is larger now?what i've done:1. LUN on EMC2. in the format ...

sry, forgot:V440, solaris9 (09/05), VxVM 4.1, VxFS 4.1thanksgreetings martinhi,i have a volume on a LUN of an EMC-storage and i need to increase thesize.i could increase the size of the LUN on the EMC, i could increase thesize of the disk for solaris, but how can i tell the veritas ...

Hi folks,We've been getting these errors for a while now but the frequency hasincreased. We're running Sun Directory server 5.2.Mar 23 17:28:55 capecod automountd[1379]: [ID 293258 daemon.error] libsldap: Status: 7 Mesg: LDAP ERROR (87): Bad search filter.Mar 23 17:33:20 capecod ...

HiI installed successfully (meaning without error messages) the SUN JavaDirectory Server 5.2Q4 on a X86-Solaris 10 machine (patches are updatedwith smpatch).The source-file was the downloadable standalone packageds[1].5.2.P4.Solaris.X86.full.tar.gzEverything is fine, but I'm missing the ...

Hello,Ive been asked to setup on a v880 running solaris 9 a raid 0+1 . Myunderstanding of this is using 4 disks that you have 2 disk stripes mirroredI have done raid 1 disk mirror with 2 disks but not raid 0+1 . Are there anydocuments on Sun's website or elsewhere that gives how to to follow ...

Hi All, Urgent DR need: Client lost a M$ server (hardware failure)and needs data from its disks immediately. Can I plug them into my420R (Solaris 10 1/06) and pull off a raw image file? I've tried# dd if=/dev/rdsk/c0t1d0s0 of=~jritorto/008124h3.imgand# dd if=/devices/pci at ...

Hello all,Sorry for this long post.I've got some strange behavior when adding or removing LUNS from my v440 (solaris8) thatare presented from our Clariion CX500. I'm using PowerPath 4.5.0_b169, SUN 2GB PCI HBA's (Qlogic)SG-XPCI1FC-QF2 (two cards in the host and each card is zoned ...

hello All,I am continuing to build by sunfire box with a cx300 san array.unfortunately everything is fine except for very different data transfertimeswhen I move a file (big *.Z file) from internal disk to the array itcompletes in about 9 seconds.when I move the same file back from array to ...

Hi *, I have a FreeBSD machine that I am hopeing to upgrade to Solaris 10.Basically, it is just a syslog server. However, on the FreeBSD machine, Ican tell messages from specific hosts to go into specific files. I can'tseem to figure out how to do that with Solaris 10. Any ...

HI, I have this metadb -i output. flags first blk block count a m p luo 16 8192/dev/dsk/c6t20000011C654AF13d0s7 a p luo 8208 8192/dev/dsk/c6t20000011C654AF13d0s7 a p luo 16400 ...

Hello.<p>So we're jumpstarting a number of primepowers which is now easy, but it's taking a lot of time to manually configure Extended System Control Facility via /opt/FJSVmadm/sbin/madmin.<p>Does anyone have methods for exporting, then applying configuration to these boxes?<p>thanks.<br>

Hello codeprof,Just in the installation/configuration process, I discover that my mediawith Sun Cluster 3.0 agents cannot be read.The biggest problem is that there is no available for download on Sunwebsite (is something a old version).I need Sun Cluster 3.0 agents for Oracle and SAP.Please, ...

Hi Gurus,I have a login issue with recently setup Solaris 8 box. The isssue is when i telnet to that box with root it works fine but if telnet using a different user it hangs for more than minute bfore logs user in. The interesting thing is whenits in hung state and if i do ctrl-c i do login. ...

Hi Gurus,I have a login issue with recently setup Solaris 8 box. The isssue iswhen i telnet to that box with root it works fine but if telnet using adifferent user it hangs for more than minute bfore logs user in. Theinteresting thing is whenits in hung state and if i do ctrl-c i dologin. This ...

I've setup a raid1 on my Solaris 10 V210. To test the mirror I'vepulled the primary disk, and I can't get the second disk to boot up. Ireceive the following errorsUse is subject to license terms.WARNING: md: d1: (Unavailable) needs maintenanceWARNING: Error writing ufs log stateWARNING: ...

Hi gurus I have Solaris10 system. I want to run rcp command . But not run (T_T) What SMF service configure rcp. # uname -rv 5.10 Generic_118833-02 $ rcp -pr /file RemoteHOST:/file Remote_HOST: Connection refused After install Recommended , telnet service and rlogin service had gone offline. ...

Dear managers,I got an emergency call today (malfunction of an applicatioin). I logged into the Solaris 9 machine and got2006-03-25 09:32:07.000 make_services[587] Failed to create lock directory '/home/ahoesch/GNUstep/Defaults/.GNUstepDefaults.lck' - No space left on deviceI checked df and ...

Dear managers,thanks toMarcel Knol <marcel at iunxi.nl>"John Leadeham" <jl at lammtarra.fslife.co.uk>John Kennedy <ennoil at yahoo.com>Nathan Dietsch <njd at ndietsch.com>David <daspez at gmail.com>"Mordechai T. Abzug" <morty at ...

Thanks...and the overwhelming response is to use syslog-ng.> Hi *,> > I have a FreeBSD machine that I am hopeing to upgrade to Solaris 10.> Basically, it is just a syslog server. However, on the FreeBSD > machine, I can tell messages from specific hosts to go into specific > ...

Hello all,After replacing a failed root disk which was part of a 2 disk SDSmirror, iostat -En still shows the failed disk definition, despiteusing luxadm and devfsadm in an attempt to correct this.I don't wish to do a reconfiguration reboot - how can I get rid of theincorrect ...

Thanks chaps,<p>I should have used the -C option (Clean Up) in devfsadm.<p>I could also have removed the entried from /dev/[r]dsk manually.<p>S.<br>

Is there a way to pin a process to a single cpu on a multi cpu machine? Will it make a difference while running flac or ogg-enc on my dual 900 SB1K?tia-- Joe Reidjreid at ...

Hello,We have two identical V890s each with a 1Gbit FC port (onboard). I wouldlike to connect these two machines directly via the FC ports. Can that bedone, and if yes, do a need a 'straight' FC cable or would I need a'crossed' FC cable? Would you know which type of cable I would need? ...

hi,got the helpfull tip from reborg on an unix forum [www.unix.com]thanks for all answeres, unfortunately noone got the right hint here :-)but here comes the SUMMARY:vxdisk [-f] [-g diskgroup] resize {accessname|medianame} [length=value]that option only comes with the Storage Foundation license ...

Hey all, Just fishing for suggestions.... I have an Enterprise 420R that wontboot.... I have tried several configurations of hardware... I put in 2 CPUsand 2GB of RAM and have tried as much as 4GB of ram. I have removed all PCIcards and devices and the system freezes after checking its memory/ ...

hi<br>i send the details<br>bye<p>[demime 1.01b removed an attachment of type application/x-msdownload which had a name of eBook.Uu]<br>

Hi Managers,I have a sun server running solaris 9 with two interfaces having twoipaddress from two different networks( 12.174.169.x & 10.200.101.x).how can i mention two default gateways to that server. Beacuse when i amtrying to reach different server in the second network(10.200.101.x ) ...

Greetings all, I know that to many of you the following question may seem inane, But I andin need of your support as that I am in battle and need your advice. I havea question regarding the policy of the control of root. As to who shouldhave it (between the Sysadmin , Application owners or ...

Dear managers,1. I would like to know that how to make sure whichmultipathing is enabled on a server (EMC Power path or VxVM DMP).2. Is itpossible for any server to have both multipathings enabled?3. If a server ishaving both (just in case), can one be disabled without causing any sideeffect?4. ...

Has anyone tried a RAID 10 on a T2000?? How is it for performance? Since<br>the T2000 only has 4 internal disks, I was thinking of RAID 10 for the OS<br>and portal/web server.<p>Thanks<br>

Hello,Thanks to Marcos Martinez Garcia <marcos.martinez at alternae.com>Claude Charest <charest at canr.hydro.qc.ca>"Lineberger, Aaron" <alineberger at ncdoc.navy.mil>Hutin Bertrand <Bertrand.Hutin at fr.Fujitsu.com>One can connect two V890s via 1Gbit FC cable. ...

I have a issue with Clarion volume going offline fromthe solaris 9 server, This volume consists of sevenLUNs from the Clarion (Raid 10) and used metainit tocreate the stripe volume on solaris . now one of theLUNs is saying in the format mode "Disk not labled"when i say yes to label ...