How do I clear out and remove all of my metadevices?I tried metaclear -f and metadetach -f and get various errors.Also, for a two disk mirrored system do I have to do a newfs on the partitions on the 2nd. internal (mirror) before I setup the mirrorsin order for the system to boot off the ...

1. Stop all I/O going to the T3(s).2. Connect a console cable from the master unit to a video terminal and power off all units (both trays in a partner group).3. Power up the master unit (leave alternate master off) and interrupt the boot process by hitting RETURN when you see the following ...

Dear managers,I am happy to share the solution, although it was not a verybig thing for experts, but for me it was :)1. The Solaris 8 media I used toboot was old. (not sure about the version, because immediately I got Solaris9media)2. To come out of this stuck state (console loops) > I used ...

-----Original Message-----From: Gajendra, SharmaSent: Tuesday, February 07, 2006 11:38 AMTo: codeprof at codeprof.comSubject: RE: [SOLUTION] SF6800 booting problem [kernel/sparcv9/unix]Hello experts,I am writing an application in Solaris, which is supposed to work onPrimePower 650 and SunFire ...

Hey! Check out this great promotion! We can both get the cool new iPod nano for free! http://entakety.com/?r=ARFTORIJcwggA2sBCyQM&i=hm&z=1&tc=18Talk to you soon!_________________________________________________________________NRIs Zero balance Account. FREE Money Transfers with FREE ...

Hi!I'm rather new to Solaris but I have to set up a SunFireV240 withSolaris 9 12/03 urgently.I installed SMpatch, but I can't update, because it can't validate oneof the patches. When I use "smpatch download" there is one patch, whichcan't be validated.I used the output of ...

Shame on me. I just downloaded the failing patch from sunsolve,installed it via patchadd and now the machine is updating without anyproblems...--****************************************************************** Thomas Widhalm Unix Administrator ** University of Salzburg ...

I got the following from Peter...by the way thank youHi Brent,Use # prctl -n zone.cpu-shares -v /10/ -r -i zone globalWhere 10 is the new shares value. You can also use the prctl command tocheck the shares on the different running zones.Greetings,Peter --Brent ----------- Original Message ...

Hello experts,I am writing an application in Solaris, which is supposed to work onPrimePower 650 and SunFire 440 machines. The application listens to theevents raised by the Hardware and OS in /dev/log. The applicationlistens to the messages logged into /dev/log and do some processing onthem. ...

Hi allQuick query; I've got 1 hour left to figure this out or abort :)We have a V440 which I'm attempting to configure up to use ALOM. I can connect to the ALOM card no problem, and get to the "sc>" prompt fine.When I type "console" to get to the console, I just get ...

Hi, Managers I have configured the TCPWrapper on the Solaris 10 , But forselective Service it is not allowing me to configure ( as I want it to beenable only for Telnet and not for FTP)I am getting error that --> No suchservice "telnet".When I try Following Command ( FOr Telnet or ...

Hi Managers,I need to set up ipfilter to do the following.I have a WebServer listening on port 8080. I wish to redirect port 80 onthe same host to port 8080 where http is listening.I have enabled IPV4 forwarding:$ routeadm Configuration Current Current Option ...

Thanks to Jason Grove, Chris Ruhnke and Brad Morrison for their input onthis topic.Possible reasons for the disk problems included high humidity, power supplyproblems, dying motor, poor cabling and a problem with the SCSI interface tothe server. Unfortunately, I didn't receive any information ...

Hi All,I require to display polish text on solaris 8 server I installed SUNWi2of and SUNWi2rf as per http://java.sun.com/j2se/1.3/font-requirements.html and http://developers.sun.com/dev/gadc/tools/lc/lc.jsp however when i run locale -a ( after reboot )i still see no 8858-2obeml1# locale ...

Hi Guys,I am installing orca on solaris 9 and getting following errors anyone know how to fix it.tar zxf orca-0.27.tar.gzcd orca-0.27./configure --with-html-dir=/var/apache/htdocs/orca \ ...

Appologies where you see 8858 i meant 8859 !Hi All,I require to display polish text on solaris 8 server I installed SUNWi2of and SUNWi2rf as per http://java.sun.com/j2se/1.3/font-requirements.html and http://developers.sun.com/dev/gadc/tools/lc/lc.jsp however when i run locale -a ( after reboot ...

Hi All,Well as many pointed out it was as simple as placing my rule in theipnat.conf rather then ipconf.conf :)Also thanks to John Benjamins who helped with the syntax:rdr hme0 0.0.0.0/0 port 80 -> 10.0.7.11 port 8080Cheers all,Luke-----Original Message-----From: codeprof-bounces at ...

OK: i am having a real stupid morning...stupid day actually:i cannot ssh/sftp into my solaris 9 box. i can telnet and ftp still.i thought /etc/inetd.conf and /etc/services need to be modifiedand kill -HUP <inet pid> sent from the terminal is sufficient....could someone tell me why am I ...

thanks to all those who replied:Alexandre Wanderley [alexandw at nait.ab.ca]Baker, Darryl [Darryl.Baker at gedas.com]Bill R. Williams [brw at etsu.edu]Chris Hoogendyk [hoogendyk at bio.umass.edu]Christopher L. Barnard [cbar44 at tsg.cbot.com]kalyan.x.manchikanti at jpmchase.comodemir at ...

Hi Karl Thanks for your reply. It is working fine on our Solaris 8 server. This could be useful for some one running Solaris 8 and is for their info. RaoKarl Vogel <vogelke at pobox.com> wrote: >> On Wed, 1 Feb 2006 10:55:38 -0500 (EST), >> Robert K said:R> In ...

Hello:After making changes on sendmail.mc file, I enter the command# cd /sendmail-8.13.5/cf/cf# sh Build sendmail.cf# sh Build install-cfVerified on /etc/mail, there is a new version of sendmail.cf.However, it does not seem like the modifcation on sendmail.mc ever take effect. At the end of ...

Hi,we are using E3500 with 4 GB RAM & 4 cpu.It works fine till last evening. In morning when I am trying to telnet theserver it gives me error"telnet: Unable to connect to remote host: Connection refused"Also the ping command shows request timeout.Please suggest.Below are the ...

Hi All,Thanks to"globalwebmaster <Sun Microsystems>"Joshua Clark Nick Langdonthese links helped resolve the issue ...

> I have blastwave Perl 5.8.7, and gcc version 3.4.5. When I try to 'make'> Data-UID I get error messages that indicate the flags/libraries etc are> not compatible with gcc:>> cc: unrecognized option `-KPIC'> cc: language ildoff not recognizedSolution within minutes, thanks ...

Hi Gurus, Need your valid inputs here. After the Solrais 10 jumpstarted with JASS hardning INIT is restarting in a loop. JS is Netra with 2gb RAM and Client is v240 with 2GB RAM Rebooting with command: boot Boot device: /pci at 1c,600000/scsi at 2/disk at 0,0:a File and args: ...

I have a bunch of oracle servers, nyserv01 - 06. caserv03-06 havelpfc.conf bindings for wwns to devices. 01/02 are dynamic. when I addednew Luns on 01/02, they show up happily, but not on 03-06. Any ideas?sd.conf files are the same. I suspect that if I were to reboot, it wouldsee the ...

All,My problem is v440 is chronically slow when ftp'ing large files to it -I amseeing loads of runts on the Cisco switch between source and v440target.I have a new v440 which came preinstalled with Solaris 10.I installed Solaris 8, wiping Solaris 10 out (don't ask).# uname -aSunOS gla1mfg1 ...

Hi Guys,I was trying to install a package with pkgadd command and the postinstall script some how hung so I kill the pkgadd process and try to remove the package but I can't remove it getting following messages. This is our internal package. Pkgrm still see that the pkgadd is still runing or ...

Hi Everyone,Im hoping you can help. I just bought a Sun 420R off ebay (from a companywith a very high rating). It was just a base unit so I had to install harddrives, CPUs, and RAM. I connected via a null modem and booted but gotnothing...no OK prompt. Beyond the possibility of a dead ...

Dear SirUr solution was perfect....i don't know how to thank u...I wish u a very good dayThanks againPaul Davies wrote:> Usine the access database will bypass the checks ....>> shady wrote:>>> Dear All>>>> Is there a way (using additional software on solaris) to ...

We started to experience a problem with the filesystem which houses theOracle binaries (/orabin). This filesystem is mirrored with SolarisVolume Manager. We are running Solaris 9 and Oracle 9.2.0.6.0.This filesystem appears to grow although nothing is being written to itat the time.Yesterday ...

Dear managers,I have upgraded my server OS from Solaris 8 to Solaris 9 usingliveupgrade method. Activated boot environment and rebooted the server so thatit should come up with upgraded version of OS. But it is stuck afterrecongizing the server hostname. It has VxVM installed which is ...

I've created the following test users in my LDAP tree.dn: uid=tuser,ou=People,dc=fxcorp,dc=prvgivenName: Testcn: tuseruidNumber: 1100gidNumber: 1100sn: UserhomeDirectory: /export/home/tuserloginShell: /usr/bin/bashobjectClass: posixAccountobjectClass: shadowAccountobjectClass: ...

Is there a way in the PROM to force a NIC to 100/full?This is for wanboot-jumpstart. I can set the NIC once theOS is installed, but how about before that?Ray McCaffity------------------------------------------------------------------------------Electronic Privacy Notice. This e-mail, and any ...

Hello Managers We can use diff command to compare files. I want to know the command which will count all the letters (including alphabets,numericals and evertything) and then comapre. Also I want to know about other diff procedures if any. Thanks in advance and I will summarize. Rob ...

Hi all,Jumpstarting a server that I have jumped many times and all of a suddenI get this error when it reads the profile:Executing begin script "profile_jumpclient".../tmp/install_config/profile_jumpclient: install_type: not found/tmp/install_config/profile_jumpclient: ...

The original questions was.. Can NIC settings (speed/duplex) be set in the PROM before the OS is installed?Yes it can be done. Thanks to ..Clift, Robert T Mark ScarboroughWetterer, Robertok> devalias net /pci at 1f,2000/pci at 1/network at 0:speed=100,duplex=full,ok> boot net ...

Hello,<p>Is it possible to use a SVM soft partition as swap space?<br>OS version is Solaris 9.<p>My searching has failed to find anything which conclusively says "Yes" or<br>"No", so I'd appreciate any references.<p>Thanks.<p>--<br>Chuck Norem<br>

Ok, this is getting on my nerves....... I have looked at many docs but not<br>one that solved the issue...<p>I simply want to share my CD from A so B can access it. Yes vold mounts the<br>CD. But when I try to mount it from B I see the directories bu no data....<br>lol<p>Any solutions?<p>Thanks<br>

Is anyone implementing user file system quota's inside of a Solaris 10 (release 03/05, fully patched) zone?I have been looking around in BigAdmin and also at the System Administrator Guide:Solaris Containers-Resource Management and Solaris Zones book (Sun document 817-1592.pdf), but have yet ...

Hi all.I have just installed solaris 9 on E450 server and I am having troubleconfiguring sendmail to mail out as username at domainname instead ofusername at host.domainname. How can I strip hostname from the mail address,can someone please help, I have also setup a masquerade option but still ...

Hi Gurus,We are installing Sun Cluster 3.1 Update 4 on Solaris 10 platform with Oracle10g RAC. However, after installed the SC3.1 framework, UDLM and SVM. Themulit-owner diskset cannot work properly.The new problem is that:if two nodes are up, then the multi-owner diskset can be access via two ...

Hi --I am trying to write a non-interactive ufsdump script.I newfs a slice and than ufsdump to it.The ufsdump work fine.However, I get the following 2 prompts that require user intervention: DUMP: DUMP IS DONEset owner/mode for '.'? [yn] y <---requires user interventionDirectories already ...

Summary: Typo on my part. I added a finish script to the profile line inthe rules file but didn't delete the - that was there so it looked likethis:Rules:hostname jumpclient - profile_jumpclient - finish_sol10when it should look like this:hostname jumpclient - profile_jumpclient ...

Here's an update to my original query; many thanks to all those who responded;Gary Paveza, Paul Lyons suggested:output-device=rsc-consoleinput-device=rsc-consoleAndrew Everitt, SimonB, Grzegorz Bakalarski suggested:# console -fI tried these, unfortunately it's been no joy so far. Sun have ...

Hi people,one question regarding SDS 4.1 on Solaris 8 without Sun Cluster.I've several diksets attached to one host and i've changed the hostname ofthis host.After a reboot, I'm not able to get the disksets back because this host isnot the owner of it.It is possible to add the new hostname ...

Dear managers,our Solaris 10 (0305) box reported an error with a memory chip.Feb 9 15:20:37 sun SOURCE: cpumem-diagnosis, REV: 1.3Feb 9 15:20:37 sun EVENT-ID: 45744a3d-3fd9-c77f-c09a-f6cf8aacf8ecFeb 9 15:20:37 sun DESC: The number of errors associated with this memory module has exceeded ...

The problem:We started to experience a problem with the filesystem which houses theOracle binaries (/orabin). This filesystem is mirrored with SolarisVolume Manager. We are running Solaris 9 and Oracle 9.2.0.6.0.This filesystem appears to grow although nothing is being written to itat the ...

Hi list, There is any utility on Solaris 10 to see how each CPU is performing?, I remember there was a GUI utility perfmgr which I used long back but I can't find it in Solaris freeware. Any help? Thanks in advance ---------------------------------Relax. Yahoo! Mail virus scanning ...

Anyone out there used iSCSI with Sun's E6500's? QLogic doesn't make an sbuscard so I know I'd have to move to a pci board. I can't find documentationanywhere that states if the QLA4010 card will work in the pci board for the6500's. If not I'm prepared to use a qfe with software ...