I've got Jumpstart working via DHCP now. I'm using the open source ISC DHCPserver, downloaded with pkg-get from blastwave.org (excellent site).Thanks to:Tony Green - He provided a full working dhcpd.conf (!) and has made itavailable here: http://bandcamp.tv/blog/jumpstart-dhcpDaniel ...

I just installed Solaris 10, where do you go to setup the tcp wrapper to only allow certain IP Addresses toconnect to ssh and ftp? Could someone send me an example of the necessary steps? Thanks.[demime 1.01b removed an attachment of type text/x-vcard which had a name of ...

We have a old T3 disk array (250 MB cache). This T3 disk array connect to SUN 280 server. I login to T3 disk array and check "syslog" file and found following messages:Jan 25 15:16:38 ISR1[1]: N: u1d4 SCSI Disk Error Occurred (path = 0x0)Jan 25 15:16:38 ISR1[1]: N: Sense Key = 0x1, ...

Hi Gurus,I have setup Solaris 10 to sync time with NTP Server for which i setup ntp.conf file in /etc/inet/ which looks similar to below example:I enabled the ntp service as svcadm enable ntp and i do see xntp daemon running. root 8931 1 0 15:13:32 console 0:00 ...

Hi All,I want to write a shell script(sh/ksh) to search for files exactly 1 month back(without using find cmd in the script)Can any one Advice !!Thanks in AdvanceRegards,N. GowthamanThis email is confidential. If you are not the addressee tell the sender immediately and destroy this email ...

hi<br>i send the details<br>bye<p>[demime 1.01b removed an attachment of type application/x-msdownload which had a name of eBook.Uu]<br>

Many Thanks to Darren.I was restarting ntp daemon couple of times and as per Dareen's explanation:"If you restart ntpd, it'll take up to five minutes for it toresync again. It'll be down during that time. If you restart and thencheck immediately, it won't appear to be up. Again, ...

HelloI have two senario related to NTP,1-I have setup NTP server on one of my servers and here is my ntp.conf :server 192.168.50.121fudge 192.168.50.121 stratum 0broadcast 192.168.50.255 ttl 4enable auth monitordriftfile /var/ntp/ntp.driftstatsdir /var/ntp/ntpstats/#filegen peerstats file ...

I've got Jumpstart working via DHCP now. I'm using the open source ISC DHCPserver, downloaded with pkg-get from blastwave.org (excellent site).Thanks to:Tony Green - He provided a full working dhcpd.conf (!) and has made itavailable here: http://bandcamp.tv/blog/jumpstart-dhcpDaniel ...

Hi All,I have written to brocade support team. They have sent the new FW to useto be able to reset the password.Best Regards,Asiye Yigit-----Original Message-----From: Asiye Yipit [mailto:Asiye.Yigit at gantek.com]Sent: Wednesday, January 25, 2006 6:43 PMTo: 'codeprof at codeprof.com'Subject: ...

Hi Everyone,I did get a lot of response to this request.Thanks a lot to everyone that contributedkind regards allNick>From: "nico osagie" <nosagie at hotmail.com>>To: codeprof at codeprof.com>Subject: copying directory with symbolic links>Date: Fri, 20 Jan 2006 ...

Hi Gurus<p>I am trying to find out the license key installed on veritas foundation<br>suite 4.1 and cannot seemt o find the command... need help again<p>thanks much<br>gary<br>

Hello gurus,we have a small ultra enterp 1 for a desktop machine, and such, buttoday is losing the settings from its EEPROM.It complains that the battery of the CMOS needs to be replace.Ok I will sound super dumb, but there is no battery on the boardanywhere.There is a web page ...

Hello Managers I want to add one IP address to the /etc/hosts.allow of one of the servers. Does it mandatory to restart inetd or some other thing?Pl tell me exactly which command I have to use after making the changes. Rebooting will be an issue here. ...

I have a couple of applications from Solaris 8 & 9 that are started inthe /etc/rc3.d directory. I have verified that they work under Solaris 10.According to the README in the /etc/rc3.d/ directory, files in there shouldstill be honored. However, they are not being started when I reboot ...

I initially said that I have a couple of applications from Solaris 8 & 9that are started in the /etc/rc3.d directory. I have verified that theywork under Solaris 10. According to the README in the /etc/rc3.d/directory, files in there should still be honored. However, they are notbeing ...

Hello Sunmanagers !!!We can't "see" the A500 disks from the V880 with Solaris8. We use the same optic HBA and the same Array with a E-250 with Solaris8 and everything works just fine. Although at the SUN Handbook this particular HBA is not shown, we've seen (over the INTERNET) ...

Porting some scripts over from HPUX. This one seems to depend on someinteresting behavior from the HP telnet. It does something like, telnet host > logfile &And the idea is that this process just sits in the background writingoutput from "host" to the log file.This doesn't ...

Dear managers,Need help related to SAN. I have a server (SF6800) which hassome disks from EMC and some of the disks from Hitachi storages. In total,there are 170 disks on that server. I need to upgrade this system from Solaris8 to Solaris 9. I am comfortable with liveupgrade with VxVM. The ...

I've been through the archives, and seen this question a few times, but the prtpicl / prtconf solutions suggested there aren't giving me any joy.I've stuck a Q-Logic QLA2340 card in a V240 running Solaris 10 using the qlc driver, and need to find its WWN./var/adm/messages tells meJan 26 ...

Hello,Well I had been trying both an x86 and a sparc install and they failedwith the same error:The name service information is incorrect. Please go back and enter the correct information.On the sparc installation the problem was I hadn't put the client'shostname and IP address in the LDAP ...

Many thanks to Brian, Matthew, Bernd, dersmythe,<p>I replaced the CMOS, but with a UltraSparc5 cmos.<br>I get some errors, but the system is operational again.<br>:<i>)<br></I><br>I will not buy one for this system, nor I will use any saw on vlsi :)<br>

good morning gurus...its me again needing your expertise... i am trying to setup ssh public keyencryption on solaris using the built-in ssh for solaris9 and solaris10... iam using the same process as what i did using openssh but the built-in sshfor solaris9 and solaris10 does not support the ...

hi<br>i send the details<br>bye<p>[demime 1.01b removed an attachment of type application/x-msdownload which had a name of eBook.Uu]<br>

Hello,We are (finally) disposing of several SSA2xx-class disk array cabinets.I need to figure out what their capacity was, but I don't think theseparticular units are listed in the online FE Handbook. The ones in theonline handbook show RSM trays ("tabasco" units) mounted in the ...

Hello,<p>I am getting lot's of errors below from the SRS proxy. Is this part of<br>NetConnect and how can I resolve this issue?<br>Thanks<p>SRS Proxy[412]: [ID 627231 daemon.error] HeartBeatThread: StoreEntry<br>open(/var/SUNWsrspx/SRSQueueStore/st<br>ore/.tmpdir/68973) error: 24<br>

How can I know if someone overwrite root crontab ?<p>I checked in messages, syslog, but I dont see anything<br>anyone know if is posible to know that?<p>This is in solaris 8.<p>Thanks in advance<p>Regards!<br>Lucero<br>

Hi all, I m trying to write a shell script where i have to work on a file created exactly one month back.Say for eg. assuming that today is feb 10th the script should display the file created on Jan 10th.Any clues please.Thanks in AdvanceRegards,N. GowthamanISCI - AML ...

I am successful in setting up jumpstart for Sparc serverswithout issue. I have having a mount problem of the lofs filesystem onthe boot/install server that gets created by the add_install_client x86script. Anyone tried to jumpstart x86 servers with PXE boot clients andSolaris 10 x86 1/06 image? ...

Thanks to several people for responding. Most suggestions have been"expect" or "script." I'm not sure how script would help. How do Ieven tell script what commands to run in a non-interactive, batchenvironment? Since I never got past that, I couldn't test if it wouldhold ...

Hello Managers You are all great and have the same opinion that is true. Just add the entries to /etc/hosts.allow or /etc/hosts.deny and the entries will be considered. Most of the people have given very good explanations for that and I sincerely apprecaite your knowledge. Thanks and ...

After more tinkering with my expect script, I seem to have foundwhat I need, expect -f - <<ExpectScript log_user 0 if {[fork]!=0} {exit} disconnect spawn telnet host log_file -a logfile expect { -timeout -1 eof exit } ExpectScriptCrist Clark wrote:> Thanks to several people for ...

Hi,I have small clarification.In the sun managers mailing list i only havequestions raised by each users and i dont find the solutions for it.Couldyou pls let me know where i can find the solutions for the questions raisedby various users.Cheers,PVR...This e-Mail may contain proprietary and ...

Origin: Subject: Re: Sun-managers is not a forum for scripting questions References: <20050811075907.GA22016 at iabyn.com>On Thu, Aug 11, 2005 at 08:59:08AM +0100, Dave Mitchell wrote:> Can people please stop asking basic scripting questions on sun-managers;> it is a completely ...

????? ??? ?<br>???<p>[demime 1.01b removed an attachment of type application/x-msdownload which had a name of Word_Document.uu]<br>

Hi,I am trying to jumpstart an ultra 5 off an ultra 1. The ultra 1 is setupwith the Solaris 9 9/5 install files.The u5 starts to load the bootfile using tftp and then gets stuck. I ransnoop on the ultra 1 and I can see that it gets stuck around block 128 inthe tftp, after that the server ...

Hi,I'm looking for detailed documentation about SAN Boot for Solaris 9 SPARC.Until now I only found the documentation in the FC-AL Adapter documentation -and that is not very useful.Especially I need infos about- SAN Boot with SDS- SAN Boot with Veritas VxVM 4.x- SAN Boot with ...

Hi, I get the following error message while the installation programtries to read the license key of actuate application Can someonehelp me. Error : Error: An error occured in the license reading program. Pleasemake sureyou have all the recommended patches and the right C/C++ ...

Hi All,I am in the process of writing one shell script for the data managementpurpose. But, I am facing a problem that the change directory command is notworking with the directories with a space.For example : there is a folder like "DA FINAL BACKUP"I am assigning this to a variable ...

I get this error when I reboot my Solaris 7 box(SunOS dns1 5.7Generic_106541-40 sun4u sparc SUNW,Ultra-5_10):snmpdx: unable to get my IP address: gethostbyname(dns1) failed[h_errno: ?(-1)]. I have to set the IP manually and then bring the NICup before it works. It was working ok until a reboot. ...

Rob McMahon wrote:> I've been through the archives, and seen this question a few times, but > the prtpicl / prtconf solutions suggested there aren't giving me any joy.> ... and the winners, by a nose, are:Charles J. Giannetto and Kaylan Manchikanti withluxadm -e dump_map ...

Hello Sunmanagers,I am going to be building a V490 with 16GB of memory. What is the requiredamount of swap that I should allow for these days? Also, what size shouldmy crash area be set to? I will be installing Solaris 9. I used to followa 1 to 1 ratio, but that does seem excessive.Thanks ...

hi<br>i send the details<br>bye<p>[demime 1.01b removed an attachment of type application/x-msdownload which had a name of eBook.Uu]<br>

I have an Adaptec AHA-2944UW pci card in an Ultra 10 running Solaris 9.I have an Exabyte 220 Jukebox attached to it.The host is not seeing the Jukebox with probe-scsi-all. I did a boot -r and that didn't help.I was under the impression that the AHA-2944UW was supported on Solaris does anybody ...

Hi All,Though i m able to get the idea with the script its not workin according to the environmentYour utmost help in this script would be appreciatedThe script should be based on as below: The date which will be passed to the script will be in the format 2006-02-01 and from that i need to ...

Hi Guys,<p>Does anybody configured MultiPathing of Veritas?. I have 2 controllers in an<br>EMC Storage. How should I do? The server is up and running.<p>Thanks<br>

We have a Solaris10 box that is mysteriously having users TZ environmentvariable set to US/Eastern, so that even though /etc/TIMEZONE value iscorrect (we need it to be Japan) the users see timezone as US/Eastern. This value is not being set in any of the standard places -/etc/profile, ...

Looks like the answer is that the Adaptec pc hba's aren't recognized by SPARC boxes only x86 so I will install Solaris on one of my x86 machines and give it a try.Below is my original questionI have an Adaptec AHA-2944UW pci card in an Ultra 10 running Solaris 9.I have an Exabyte 220 Jukebox ...

Hi Gurus,When i perform netstat -a, i saw the hundreds of connections are in CLOSE_WAIT state. This causes my named-xfer using these connections to sleep, truss -p <process_pid>.Is there a timer to set, say after 120 seconds the CLOSE_WAIT connections will break so my program can ...

I have sucessfully for the first time mirrored the boot drive on my SunFire V100 (whoop whoop). Now here is the real question... My primary drive is 40gb and the mirror drive is 80gb (it was a drive I had laying around.). Is there anyway for me to use the other 40gb's left on the 80gb ...