Dear managers,> Partition Tag Flags Sector Count Sector Mount Directory> 0 2 00 15474816 140700672 156175487 /> 1 3 01 12096 1052352 1064447> 2 5 00 0 156175488 156175487> 3 7 00 ...

I have a jumpstart server already setup and would like to experiment with<br>JET. Will I have any problems with installing JET after my jumpstart server<br>is already running.<p>Thanks<br>

I have an intel server running Solaris 8. how do I force the iprb NIC to100fdx. It's iprb.conf file looks like this now.root at server:/kernel/drv >cat iprb.conf # Driver.conf file for the D100 IntelPro-B## Copyright (c) 1996, by Sun Microsystems, Inc.# All Rights Reserved.##ident ...

Thank you to DK, Winter, and Damian West for their responses. Theydidn't really address the meat of my problem... but their advice wascompelling nevertheless.> My ultimate question is this: What is the minimum dependency> requirement to augment a Solaris 10 SUNWCreq install with ...

Many Thanks to the following who responded in my hour of need (Projectnow back on track):- Jim VandeVegt Thanks for detailed response- Damian Wiest We both got the root cause ok, but I fixed theproblem differently- Joseph Saldana Thanks - the info you supplied was useful but not inmy ...

I created two six member 48 GB metas ( size 8GB) on a Sunfire v880, Solaris9.0 server connected to a DMX1000. One meta shows up fine as 48GB. But theseond one is only 16GB. inq/syminq reports the meta size as 48GB, butformat reports it as 16GB. Is there a fix without rebooting the server ? ...

Dear managers,I am facing problem in executing "sa1" command using crontab.I tried to run it from command line, it is working fine from there. But fromcrontab of "sys" user, it is throwing the following error: (This is fromthe /var/cron/log file. The OS is Solaris 9)> ...

I've got a small issue here. We've got an E3500 that serves up a couplezones for different development services. The root zone has connections totwo private and one public subnets. It's default gateway is a router on thepublic subnet. The cvs zone has a connection to one private subnet.The ...

I'm trying to fsck this filesystem. It was fine thefirst couple times.When i did it the third time, making sure its clean -i run into this problem:# fsck -F ufs /dev/md/rdsk/d3** /dev/md/rdsk/d3BAD SUPER BLOCK: BAD VALUES IN SUPER BLOCKUSE AN ALTERNATE SUPER-BLOCK TO SUPPLY ...

I wish to change the syslog destination of logs when tcp wrappers onSolaris 10 block a connection. (This is the tcp wrappers that are partof the Solaris 10 OS) Right now violations go to daemon.warning. Ireally do not want to do this by service (telnet, rlogin, bpcd, ssh) butby what the tcp ...

Hi Managers,Can anyone help me stop this coming up in my messages on my replica, my masteris fine.Jan 11 20:25:49 ss000067 nisd[363]: [ID 455754 daemon.error]nislib:get_group() group object "admin.uk.centricaplc.com." does not exist.Jan 11 20:25:49 ss000067 nisd[363]: [ID 244599 ...

Dear managers,While setting up jumpstart server for Solaris 9 using DVD, Iam able to finish the installation using first DVD of solaris 9. I have nowinserted second DVD to append the softwares. But it is giving following error: (root at server01)/mnt/Solaris_9/Tools=> ...

Looks like most are using command line and not the DirectoryConsole GUI to add groups. I see the group now in Directory Server Console although don't see how within the console to add someone to the new group but I'm sure it can be done via command line.Dave.James Scott provided me with the ...

Hi Gurus,I have setup Sun Fire V240 with Gig NIC (ce0) but i am getting very bad performance.So i changed the NIC setting to Auto and disabled all other settings however if i force ce0 NIC to force to Auto it forces 10hdx also enabled. I can't disable that at all.How do i setup NIC to force to ...

hello my sun solaris system has two network cards that it shipped with but as it is it can only see one NIC , that is bge0. running netstat -rn and ifconfig -a only shows one NIC. running devfsadm doesn't help either. does anyone have any idea what could be wrong TIA ...

Hi SungurusBelow is the output of top command ran on one of our servers, withoracle database installed.At the moment, the report shows that the percentage used by the kernelis 44.8% which I believe its quite high.And I am having 19gb swap space used.Can anyone give me a technical clue to what ...

Hi,We are having restrcicted ftp access setup on HP-UX server having HP-UX B.11.00 OS using default /etc/ftpd/ftpaccess file.When a user id having /usr/lib/rsh shell is used to FTP to the server from our internal network the restricted access works fine. The user sees "/" as current ...

hi all the card is inserted in the slot. the first interface is bge0 which i configured for my local network. running ifconfig -a shows me there is only one interface, that is lo0: flags=1000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4> mtu 8232 index 1 inet 127.0.0.1 ...

hi all the card is inserted in the slot. the first interface is bge0 which i configured for my local network. running ifconfig -a shows me there is only one interface, that is lo0: flags=1000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4> mtu 8232 index 1 inet 127.0.0.1 ...

Hello all,I've just setup a zone on a Solaris 10-x86-system. When I try to ssh toit, I get the message "Failed to acquire GSS-API credentials for anymechanisms (No credentials were supplied, or the credentials wereunavailable or inaccessible)"Here's the output of sshd -p 2222 ...

Thanks to everyone who replied.It looks like this particular setup isn't possible. Non-root zones need tobe on the subnet that the root zone has a default gw on if they wish tocommunicate with other networks.To everyone that suggested checking the /etc/defaultrouter file, thatdoesn't exist in ...

Hello Managers,Any body has configured DDNS on Solaris? I have a problemwith DDNS and DHCP as I ran out of IP addresses and I have setup one morenetwork on DHCP and the issue is DNS is not working as my DHCP and DNS serversare Solaris and Windows clients are not able to do forward lookup ...

Dear Sun Managers, I am trying to set up an automatic mailing of support reports from one ofour servers on a customer site I have tried but to no avail using sendmail configuration and was wonderingif someone could talk me through this from scratch? Architecture is: A single Solaris server ...

Hello Managers,The company I work for currently has an install of 300+ Sun systems fromSolaris 7 to 10 and we are on Sun Spectrum Gold service. Our Sun SE hasrecently suggested we use a service from Sun for managing our patch cyclethat is centered on a product called "Traffic Light ...

I asked:> I wish to change the syslog destination of logs when tcp wrappers on> Solaris 10 block a connection. (This is the tcp wrappers that are part> of the Solaris 10 OS) Right now violations go to daemon.warning. I> really do not want to do this by service (telnet, rlogin, ...

Does anyone have patch 112963-22 laying around? It's for Solaris 9. Thispatch fixed a security vulnerability in the linker. To fix this problem, Ihad applied 112963-23, but now I have a new application that won't work on112963-23, but will work on 112963-22. And SunSolve doesn't have ...

Thanks to everyone who helped. A few people sent me the patch and BarnardChristopher sent me a link to ftp.cs.tu-berlin.de that has all patches sunhas released. Great tip.The problem I had was that the vendor would not support their software onanything higher than 112963-22. They claimed ...

Hi, I've got a general question about a storage migration we are going to be doing soon..They way things look now, its a 2 node cluster, attached to a Hitachi 9960 storage array. Suncluster 3.0, Solaris 9, Using Cluster Volume Manager 3.2.. The quorum device is one of the 9960 Luns.We will ...

I have an app that under previous versions of the OS ran out of inetd.conf.The vendor has confirmed that it will run under Solaris 10 just fine. SoI put the needed line into the inetd.conf file and ran the inetconv command,which generated the .xml file in /var/svc/manifest. But what I am ...

Darren wrote: Message: 6Date: Thu, 12 Jan 2006 14:33:08 -0000From: "Darren Cuddy" <darren.cuddy at serco.com>Subject: Setting up mail on a Solaris ServerTo: <codeprof at codeprof.com>Message-ID: <003201c61785$1ba8bbd0$3d02230a at altaris.com>Content-Type: text/plain; ...

TO All Helpers:Platform: E450 system running Solaris 2.8Two servers (A and B)Server A has a tape drive. Wanting to ufsdump the file systems from Server B and append the dump to server A after server A completes its ufsdumpQuestion:I was able to do ufsdump from server A to tape drive without ...

Thanks to :Chamkura, Balki" <Balki.Chamkura at sabre.com>The trick is to use mt rew before issing mt fsf command.I used mt fsf alone and it always give me I/O error.The fsf will position the tape drive to next ufsdump. If you have more thanone ufsdump, make sure you count them ...

Dear SunManagers, I am looking for the best practices for selection ofraid types in veritas file system on Unix/Solaris. Some of the points I amlooking for is: (Assuming that all the disks are either 36GB/72GB in size,and there is no budget constraints.) 1. I need to have 100MB-500MB of ...

Hi,I'm in the process of updating several machines to the recent version ofsendmail; however I seem to be having issues finding a binary package.I've checked sun.com and their individual companion package downloadsite does not list sendmail as an available package. I have alsochecked ...

I get following errors while applying Sol8 Kernel patch 108528-29. I amcurrently at 108528-27 andneed to apply this before I can go to 117350-28. I got only one clue fromsunsolve that 109079-01has conflict with 108528-29 but I do not have that one installed anyway.Quote ...

Thanks to Peter, David , Andrew Hall, Dan Robb and Laker Zhu.Well it was a bad NIC that was causing the issue. I replaced the it and it workd .As regards ndd settings it doesn't accept only Auto. It has to be Auto and 1000FDX both enabled.Thanks to all.My question was:>>>>Hi ...

Hi Gurus,One of my Sun Soalris 8 was running very slow. When i ran top it was showing ttymon process chewing up most of CPU. I killed it and things were fine. After some days again the same issue. Is this ttymon process being used for console? Can we disable this so that it won't have problem ...

Hi All...Any recommendation on using Raid 1+0 across 6 or 12 harddisks ? Which onewill givebetter thruput. I want to use that volume for Oracle databases ? Thisvolumes will be usingEMC fcal disks on CX600 volume.Also, if anyone has been using metalun, pls. let me know the command toresize the ...

Hello Gurus;I am curious about the tape devices compression facilities in Solaris.I am assuming that if I do something like#tar cvf /dev/rmt/0c <some directory>Solaris will use the compression capable device driver to write onto /dev/rmt/0Assuming that the hardware (in this case a DAT 70 ...

Hi all,I was just wondering. I'm back from holidays and I noticed in the system messages (SunOS 5.9), that during the passage to 2006 which included a "leap second" the NTP daemon (ntpd 1.4.2) behaved stangely eventhough it is supposed to handle "leap second", and afaik, ...

hello all,i have a wrapper around some apps, as in:#!/bin/shulimit -t 3600/usr/local/firefox/firefox "${@}"but i notice: PID USERNAME SIZE RSS STATE PRI NICE TIME CPU PROCESS/NLWP 3651 user1 212M 108M cpu2 20 0 21:00:44 11% firefox-bin/4firefox runs since ...

Hi All, We bought 2 StoreEdge 3310 JBODs for our development region attached to SunFire v490 box. These were very cheap at developer price from SUN. To upgrade this with SUN offered ON-Array RAID controller would be very costly. I want to buy a HBA which has RAID 10. I perfer hardware ...

I asked:> I have an app that under previous versions of the OS ran out of inetd.conf.> The vendor has confirmed that it will run under Solaris 10 just fine. So> I put the needed line into the inetd.conf file and ran the inetconv command,> which generated the .xml file in ...

Hi,I'm having trouble with two machines, where syslog refuses to logmessages to files.I've verified the permissions, the syslog.conf file is default solaris9, I turned on debuging with 1 minute mark intervals and still seenothing logged to files.I've also verified the file system has plenty ...

Dear managers,I am tryingto get the second interface of a X2100 to work. On http://sunsolve.sun.com/handbook_pub/Systems/SunFireX2100/ spec.html#StandardIntegratedInterfaces I found that this interface is called bge0, so I created I file /etc/hostname.bge0 withthe ipaddress. I also added an ...

Dear managers,> I am tryingto get the second interface of a X2100 to work. On> http://sunsolve.sun.com/handbook_pub/Systems/SunFireX2100/> spec.html#StandardIntegratedInterfaces I found that this interface is> called bge0, so I created I file /etc/hostname.bge0 withthe ...

Hi,We are using E3500, with 2 processor & 4 GB RAM.If we open new terminal to login than we are not able to login to ourserver.Please see the output of /var/adm/messages:an 13 11:07:31 build-server scsi: [ID 107833 kern.notice] Vendor:SEAGATE Serial Number: 0038D0KQEKJan 13 ...

Dear Gurus,Please see the simple network diagram below.Any need some help how to do DHCP + NAT with Load Balancing at the FirewallServer as a gateway to 2 diffrerent WAN GatewayI need your help gurus.Thank you--No virus found in this outgoing message.Checked by AVG Anti-Virus.Version: 7.0.296 ...

Hello,I am having some issues using LDAP and PADL on a Solaris 9 V890 server. Ican authenticate via SSH to the server using LDAP accounts. However, as rooton the server, when I enter the 'groups' command for an LDAP user, the OSreturns accounts of other users and some of the groups the LDAP ...

Dear managers,I am replacing a Solaris 9 machine with a Soalris 10 machine. The final missing bit to migrate is the DNS server. On Solaris 9 I usually setup the files in /var/named and /etc/named.conf and then call /etc/init.d/inetsvc startto start bind. /etc/init.d/inetsvc does not exist on ...