I got few response for this problem, finally we figured out somebodypressed power key.Here are response1.prtdiag -v ? Enterprise-class systems would report hardware problems(including AC Powser Failure) here; being follow-ons, I'd expect SunFireto do that, too.2.Try checking the console logs ...

Hi ,I have Netra-T1 command lom has work :-----------------------------------root at prod-media01# uname -aSunOS prod-media01 5.8 Generic_108528-14 sun4u sparc SUNW,UltraAX-i2root at prod-media01# lom -tSystem Temperature Sensors: 1 Enclosure 33 degC : warning 67 degC : shutdown 72 ...

hi,guys,another questionis the miniroot a mini solaris system?can i use redhat to put a solaris miniroot to local harddisk(etc "dd if=miniroot of=/dev/hda",and start from harddisk a solaris system?thanks_________________________________________________________________Cb7QOBTX MSN ...

Dear All,The custom application that was designed works on the GUI feature of theSolaris OS.One of the servers is disabled with the X-windows.Please advise as what other feature as be used to enable GUI functionalityto use the application.I will summarize.Thanks,ManiThis e-Mail may contain ...

I have a SUNBlade 100 with two Ultra-SCSI cards. The backups to the tapedrive (Exabyte 8505) on my system have been failing for the last couple ofdays. I had thought the tape drive was perhaps defective because it is old,and since I have an extra tape drive, I tried this morning to replace ...

Hi,Below is my current Solaris 8 OS disk partition(actually I've repartitioned slice 7 which holds the empty /home directory to give up 25 cylinders to slice 3)Looks like I have to use slice 3 & slice 7 tostore the metadb as other slices already havedata while slice 7 contains the empty ...

hello all,It seems I have a 'mystery route' added to my Solaris 8 routing table and I'm not quite sure how it got there.It's not in any startup script, so I'm thinking pehaps that in.routed has added it.The scenario is as follows, I do not have a /etc/defaultrouter defined as my default ...

Thanks to 3 persons below whom I've learntsomething in my new quest with Solstice Disksuite:Vincent Valee :If you have FC disks, you will have to rebuild thedevices for the OBP.Tom Grassia :After you've done this, do a metastat. Do you see amirror set up, with two submirrors? The ...

Hello,In a Sun V240 I have installed Solaris 10.Before starting Sybase 12.5 install, I have created two raw devices c0t0d0s3 & c0t0d0s4.Then I did:chown sybase:staff /dev/rdsk/c0t0d0s3chown sybase:staff /dev/rdsk/c0t0d0s4Sybase install errors off while creating master device:kernel Checked ...

Hello,Following my pursuit of installing Sybase 12.5 in a Sun V240 running Solaris 10, I stopped vold by issuing /etc/init.d/volmgt stop, and restarted the Sybase install. It stopped further on while trying to access the raw device:basis_dsizecheck: attempt to open device '/dev/rdsk/c0t0d0s3' ...

After flar archive creation of solaris 9 operating system we had apply a patch needed for an application. Does anyone know if is possibile patch the flar archive up or I need to recreate it ? :-/Thanks a lot...MC[demime 1.01b removed an attachment of type text/x-vcard which had a name of ...

Hello Sunmanagers,what is infact the largest size for a phyiscal disk. At the moment i'm notable to Label LUN's greater than 2TB. OS is Solaris 9. Machine for testing is at the moment a Ultra 30. Allrelevant patches according to patch 114129-02 are incorporated. If i run format -e i will get ...

[I forgot to put SUMMARY in the subject]Managers,I replaced the CPUs and memory modules, same thing happened. I alsotried to remove the PGX64 card. Same thing. panic.I tried init 0 with Solaris 8 on the same 280R (had an spare disk with Solaris 8). Did not result in panic.... I also tried init ...

I just downloaded and installed Solaris 10GA on two Ultra 10 machines. Onemachine I did a live upgrade and the other I did a fresh install. Themachine that I did a live upgrade on allows me to select different modes onthe Display Modes tab but the fresh install does not. The XscreenSaver ...

I am having problems trying to find the right build time options to set the runtime library path; I want to include non-default system library paths.For example when I try to run snmpwalk I receive the following error:ld.so.1: snmpwalk: fatal: libcrypto.so.0.9.7: open failed: No such file or ...

This problem can be resolved by setting the LDFLAGS env variable or passing --with-ldflags="-L/usr/local/ssl/lib -R/usr/local/ssl/lib" to configure.Thanks to all who responded.Stuart WeaverUnix Systems AdministratorElement K500 Canal View Blvd.Rochester, NY 14620I am having problems ...

Dear adminsI4m having a terrible problem.Recently, I was installed a openldap software in a Sun Solaris 9 box. Initialtests are ok, but now, when I was migrated my users to this system, frequentlythe ldap daemon stops to work. In the logs, I was saw this message:warning: cannot open ...

Anyone used a 3Com 3CCFE574BE NIC (a kind of old one) on Solaris 10? Any<br>clues<br>on how to config for this beast. (Yes I am looking to get something<br>supported,<br>but the wheels of progress are slow.)<p>JC<br>

Hello,I have two Sun T3 w/ 9 36Gig hardware raid arrays neither of which is on sun hardware support. I would like to make just one of them usable as a repository for backups (i.e. semi-important data, but not worth the price of support). I have 8 of the 9 T3 disks setup as a RAID5 volume and ...

Hi, YannThanks for the fastly response. :-)The problem is that if I only stop/start the daemon, the file descriptors ofthe system are used. Then, I was write a script to restart the daemon andautomatically change the plimit value:PID=`cat /usr/local/var/run/slapd.pid` restart) echo ...

What is the inode limit on Solaris 9?<p>Thanks<br>

Just wondering. I'm running Solaris 5.8 and I've encountered thisproblem on an Ultra-250 and a Sun Fire 280R.When I do: patchrm 108528-29 It removes the patch, and then it deletes the /var/sadm/patch/.patchDBfile.Not sure why this is happening. It never happens to anyone else here atwork ...

Hi all,I have added a third dns server to the mix. All are Solaris 9 runningbind 9.2.1. The master and existing slave are working great. Theyresolve internally as well as external domain names just fine.The 2nd slave was pretty much cloned from the existing slave as far asOS and bind. I ...

Hi Gurus,I am in a big mess right now.I hope someone bails me out.I connected a Sun Netra 20 Server to a Sun 3310 Disk Array in a SingleBus configuration. I installed a SCSI card in the server and installedall the qus drivers.I could see the Disk array earlier. But i needed to change the ...

Greetings,I have rsync running on one of my servers,(called in inetd.conf) and amtrying to allow only certain hosts to obtain files on this server. Itseems the host allow option should work, but so far, I've beenunsuccessful. Currently, I am using the following syntax in my configfile:host ...

Greetings,I am trying to debug a mysterious problem. We run several mailservers, of which in total we probably handle upwards of 1 millionmessages a day. Our mail hosts are set to relay mail to theirultimate destination. In order to do that, sendmail is configured assuch:1. ...

I wrote last week that I have a SunBlade 1000 that I put into high diagnostics by setting diag-switch? to true and diag-level to max. Now that I've set those nvram variables the machine powers on and fails POST. According to sunsolve this is the procedure to reset the nvram parameters to ...

Hi Can you please enter your contact details in my address book. Click on the link below: http://www.bebo.com/fr1/10232728a484122677b143804762c637865424d20 After we are connected, in the future, any changes you make in your contact details will be sent to me. Thanks for your help. ...

Archive-name: codeprof-before-postingLast Updated: $Id: before.posting,v 1.19 2002/11/21 15:07:17 jdd Exp $NOTE: This message is posted periodically to codeprof on behalf of all members of the Sunmanager's mailing list. Please read it carefully before posting. This document can be retrieved ...

Hi Guru,<p>Any idea, my rootvol is resync'ed very boot time with solaris 9 Generic 117171-12, root disk is mirror using VxVM 3.5 MP3<p>THanks,<br>

i can't find docs about x86 cd.<br>has it five sun slice on it,just like the cd for sparc?<p>_________________________________________________________________<br>Cb7QOBTX MSN Explorer: <A HREF=" http://explorer.msn.com/lccn"> http://explorer.msn.com/lccn</A> <br>

My question was how to avoid serios accidents on a production system while patching it? How should I apply recommended patches not to risk the usability of my system? What is your patch routine?Mike Salehi writes:===================We do not apply the latest patch as it becomes available then ...

Dear Gurus,<p> What is SAFARI speed on sparc processors ? when I give .speed<br>command at ok prompt, it displays 4 acitive CPU's and last line is<br>SAFARI speed : 150 MHZ.<p>Any pointers will be helpful.<p>Best REgards,<br>Josh.<br>

Hi Gurus, Although the initial cause of my problem isn't directlyrelated to Solaris, I think altering a system configuration might help it.We currently have a customer who is running are software on differentmachines which communicate with each other through CORBA. Yesterday corbacompletely ...

Dear All,I've got a case using solaris9, which is I wanna try to delete one of IPaddress from network route, fyi network config can figure out as follow:root# netstat -rnRouting Table: IPv4 Destination Gateway Flags Ref Use Interface-------------------- ...

Hi All,I have a question for you.When I create the new directory, the link count become 2 (ls -ld/directory_name).I think it is 2 due to . and .. directories. If it is, why the link countpoints these direcotry?When I create the new subdirectories under this directory, the link countincrements ...

hello all,this morning a terrible thing happened ;)i had given a "shutdown immediate" command to an oracle instancevia svrmgrl.since no reply came, i decided to type that command in again.before hitting enter, svrmgrl had returned to the unix shelland the "shutdown ...

Dear All,I have ss-20 box which is running Solaris 2.6 it was working fine tillyesterday. Suddenly none of the user are not able to login except root. butif i changed UID 0 for ordinary user it's finethe error message is as followsafter typing password, it says "No directory! connection ...

Dear all,I have been struggling with this problem for some days andhave just about exhausted all possibilities so I'm askingfor help now.The Problem:============We have a new SUN V240 & a SUN StorEdge 3310 SCSI array. Thelatter is NOT the JBOD variant but has only one controllerand 5x73GB ...

We have SUN E280 server for 4 years. The CPU speed is 750 Mhz. I know E280 is our of SUN production line. Due to the budget issue we can NOT buy brand new server, we plan to upgrade CPU to higher speed. Based on what I knew, E280 support up to 2 X 1.2 GHZ. My question are:1. Will my E280 ...

I have a recalcitrant RSC on an E250 with Sol 9.Can someone tell me what the firmware should be for this card. Icurrently have Version 1.14.Are these card the same as used on the Sunfire 280 and 480RegardsPaul ClaytonGlobal Unix Manager / Network AdministratorIntec BillingCape TownSouth ...

Does anyone know the correct procedure for mounting a USB deviceon specifically on a SunBlade 1500? I need to (a) mount itand (b) as a non-root user.I am running Solaris 9 4/04 with the latest vold patch.I have already spoken to Sun tech support for a number ofweeks and they were unable to ...

Hello all,Here's the short answer.I'm a moron.The long answer.I was forgetting to rewind the tape after screwing up the ufsrestore commands. Therefore I was at EoT. Once I smacked myself in the head, and got calmed down by Tom Crummey (who does not live up to his name), I got things under ...

Thanks a lot for Kevin Shaw, Michael Horton, RIch Bishop..Very very specialthanks to Tim Chipman, Darryl Baker for helping me to understand what exactlyhas to be done..Finally we are going for a NAS box and most probably it will be a QNAP basedsolution. For details please see their website ...

Just one minor quick addition. If you follow the instructions below you'llhave to enter the pass phrase whenever you start the server. If you want itto come up automatically when the machine boots that can obviously be a bitproblematic ;) Here's the work around from the apache.org ...

Problem has been solved. Thanks especially to Will Enestvedtwho responded almost immediately with an answer that pointedme in the right direction.My original question;>>Dear all,>>I have been struggling with this problem for some days and>have just about exhausted all ...

I've been asked to look into the possibility of encrypting our backups and was hoping someone here had done this before.The goal is encrypt the stuff that goes on our tapes well enough that we don't have to worry about losing one. I understand all the drawbacks involved in encrypting backups, ...

Is there anyway that I can force the ownership of the files created in a<br>directory to be the same as owner of the directory. the files created inside<br>the directory are by users who have group write priveleges for the directory.<br>thanks<br>

Thanks a lot to Dale Ghent, Frank Van Liedekerke and VEGH Karoly.Special thanks to Dale...The solution is: RewriteCond %{HTTP_HOST} ^www\.test1\.com$ RewriteRule ^(.*)$ http://www.test2.com$1 [R=permanent]Worked for me after I figured out it silly mistake I made was putforward slash ...

Dear adminsThank you very much for all! With the unvaluable help of many people (specialthanks to Antonia Gomez, Darren Dunham, Bernd Schemmer and Yann Geneste), Icould solve my problem.The original question:>Recently, I was installed a openldap software in a Sun Solaris 9 box.>Initial ...