Related the previous message:The failed disk info is "offline" in dmesg (but the disk is connectedand powered on):Mar 2 19:21:20 fmri0 scsi: [ID 107833 kern.warning] WARNING:/pci at 1f,4000/scsi at 3,1/sd at 3,0 (sd18):Mar 2 19:21:20 fmri0 offlineIn format, ealier today I had: ...

Hi,I have 2 hard disks (73GB and 36GB) striped into about 104GB and mountedas a single filesystem for non-system data storage. Now the 36GB disk isdead, and I would like to know if I can still recover any data that ison the 73GB disk.There are data backups over network, but it is time consuming ...

Many people responded to this. Half asked if I would summarize as theyare in the same situation and half responded with solutions that theyhave come to. Most recommended that it simply relies on theapplications that you are running on the box and several responded that4 gigs should be ample ...

Managers,I have a sun v120 with mirrored disks that after being rebooted did notcome up. I believe that one disk had died without notice and since thiswas the boot disk it was only noticed then. The issue I'm having is thatthe disk is detectable but I am unable to format it. I have ...

I'm attempting the migration from SunScreen to IPFilter on Solaris10. My question for the group is has anyone managed to get on the email distribution for IPFilter?Their webpage at http://cheops.anu.edu.au/~avalon/ip-filter.html claims you can do the typical majordomo subscribe routine to ...

Hello,I would like known how to mount all slices off a CD/DVD on Solaris 10 x86?Because when I mount a CD, only one is mounted and I need all slices.Thanks,Felipe-----------------------------------------------------------Sign up and get your 30GB webmail at www.30gigs.com ...

All:Hardware: Sun E6500 OBP: 3.2.30 3.3v 33/66mhz pci riser board part #: 5014128 Qlogic qla4010c (pci gigabyte network cardProblem: We installed the pci io board with the above riser board and thesystem completed post without a problem. Once the pci network card wasinstalled the ...

Hi all,Iam using solaris 2.9 server with a internal boot disk and external diskarrays for data storage , For some reason my system is not getting boot ,I decided to change the external disk array to another identical system,This is the scenario ,lets suggest me to do the same .Thanks and ...

dear allPl. help me. I'm facing the problem in enabling the ftp service inmy system. it is running solaris 8. problem is that It says connectionrefused when I try to ftp. even on same machine when I try to ftp itself itsays connection refused. that means ftp service is not running on my ...

Can anyone tell me if there's any other way to set the ip address of a 3510without having to first connect via the com port?The docs say the default is that it's DHCP enabled - so if I plug it in to ournetwork, how do I then find the device name?should it have come with a db9 to db25 adapter? ...

Hi guys,I have an Ultra1 with 512MB RAM acting as tacacs+ server. Here is theuname output:# uname -aSunOS ul 5.8 Generic_117350-02 sun4u sparc SUNW,Ultra-1For some time now the machine will occassionally complain about /tmpbeing full and after one or two days it will deny any process ...

ok,General consensus...Plug the 3510 into the network, look at DHCP server logs and spot the grab fora new ip address. telnet in on this address and configure the static iprequired.Lovely.Thanks to all who contributed.GarethCymraeg:-Mae'r neges hon yn gyfrinachol.Os nad chi yw'r derbynnydd y ...

thankx to you all.I've solved the problem. it was a very small problem. Acharacter was there in the inetd.conf file at line where ftp entry is located.Thanks & regardsvikasOn Wed, 05 Apr 2006 Mangat,Vicky wrote :>That's good,this explains that you need to look into inetd.conf and send ...

Greetings,(Things have been working for a while, so I have been quiet :-)Our Sun/Hitachi SAN admin allocated new disk for us,and we are hoping to see it without a reboot.Does anyone know if this is possible?Archives & Google don't seem to know....We ran devfsadm and it did not ...

After receive a couple of reply, here is the summary:The Sun Fire T1000 is intented to be very lost cost server to be use as acluster node. That explain the non-redundant power supply and hard disk.Same thing for no optical media drive to save cost, you will have toJumpstart the system.It is ...

All, I am trying to map my F5 key to perform a left control and right bracket at the same time. If I map the key using: xmodmap -e "keycode 69 = Control_L bracketright" and run the xmodmap -pk it looks fine but the control left or bracketright is executed one at a time and not ...

Thanks to all who responded. So many responses. Thanks Guys.The issue was quota.workaround was to: - remove quota from /etc/profile /etc/.loginThanks again Gurus.shahbMy original post was:I have a login issue with recently setup Solaris 8 box. The isssue iswhen i telnet to that box with root it ...

Hi Gurus,I am in a process to jumpstart E4900. When i console to the box it gives me "Please login:" prompt. I tried admin and root user to get OK prompt or lom promt but unable to do so. Does anyone with which user you login to E4900 console? Its new box. Also does it require to ...

Hi,I am trying to install GNU tar on my Solaris 9 server.when i run the configure i am getting the followingerror. Please can someone advise what i am missing?. Iinsalled GCC also.# ./configure checking for a BSD-compatible install...config/install-sh -cchecking whether build environment is ...

The log file for the Veritas Cluster for UNIX is engine_A.log. As anindividual in operations I am often asked to tell mgt - what happened.Does anyone have any scripts or anything they've used to parse the logfile to determine what happened?-- Joe Reidjreid at vnet.netTactical Solaris Systems ...

Hi Gurus,There was a typo in last email. It should be Sun Fire V490.I am in a process to jumpstart V490. When i console to the box it givesme "Please login:" prompt. I tried admin and root user to get OK promptor lom promt but unable to do so. Does anyone with which user you loginto ...

Hello ManagersI am trying to install DBI on my Solaris 10 box.[root@]/usr/local/bin/DBI >makecc -c -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -xarch=v8 -D_TS_ERRNO-xO3 -xspace -xildoff -DVERSION=\"1.50\" -DXS_VERSION=\"1.50\" ...

Fellow managers:It's been a while since I was asking a qeustion rather than answering, buthere goes.My employer recently purchased 6 used Netra T1 105's for some light-dutyinfrastructure work (DNS specifically), and one of them is acting a little...wonky?Basically, this one crazy machine ...

Thanks to Dave and Colin for the responses.The answer: No. There is not an OBP version for a Netra 20 platform thatsupports wanboot "at this time", nor is there any work-around that does notrequire a boot from external media. See below.Andersson, Enoch (Titan) @ TITAN wrote:> ...

Thanks to Casper Dik and Bernd Schemmer for their time an replies. Dik actually found the problem asking us to check if we were not accidentily running a Solaris 10 miniroot installing a Solaris 9 software tree. This was indeed the case because of a typo in the bootparams file that we ...

Does anyone have a reference to a description of the the various kernel statistics that are available through the kstat interface?There are some obvious one (Eg unix:0:system_misc:avensun_1min). The network ones are also fairly obvious,but what about the rest, such as ...

We have SUN server which run Solaris 8 O.S. and we have several cron job run daily on 2:30 A.M.Does Solaris will run correctly on 2:30 A.M. cron job?Based on what I know LINUX system cron job will NOT run on "missing hour" and will run twice on "duplicate hour". How about ...

Hi All, I am facing a serious issue with SunFire V440 machinerunning on solaris 8.As a root user I can login through telnet or ssh. When I try to login asa normal user it is showing following error, after giving the password.login: checkPassword:Hi,Server is going to maintainence ...

Thanks for all your replies.Peter McLartyAlan paeRafael AngaritaChuck LinMatthew HanniganAnthony D'AtriSteve SandauJohn LeadehamMark KingSnars.maillistRichard SkeltonJim SeymourBrad_Morrison andVidyanathan.Most of you managers have pointed the correct one. Accordingly I havemarked ...

hi<br>i send the details<br>bye<p>[demime 1.01b removed an attachment of type application/x-msdownload which had a name of eBook.Uu]<br>

Any experiences, positive or negative, connecting a 3511 SATA array to a Sun 240 via a JNI FCE-6460-N HBA?---------------------------------Jim VandeVegtVandeVegt @t yahoo.com, Jim.VandeVegt @t PhysiciansMutual.com Eliminate the IRS and put the fair consumption tax in place. Visit ...

Hi all,I'm using Solaris Volume Manager (3.0,REV=2005.01.09.23.05) underSolaris 10 to set up a mirrored root disk on a V100x with two 72g drivesas per InfoDoc 28196.I've realized - too late - that my second drive (c0t2d0) doesn't matchthe main drive (c0t0d0) with respect to its partitions. ...

I have a Solaris 9 box and would like to take some screen shots and print them to my printer. I noticed there is a button on my Sun keyboard that says "print screen" but it doesn't seem to be doing anything.Does anyone know how to do this?Thank You.Dave ...

Thanks toAndy YotherGary LangKing RavNadigThe resolution was to:Connect to the serial port (located near the on board nic's) not the RSC card.Thanks Gurus.My original post was:>> >>>There was a typo in last email. It should be Sun>>Fire V490.>>I am in a process to ...

Hi All, Thanks to those that replied to my problem, specialy Reggie Beavers, Shyam Hazari and Pascal Grostabussiat. I am waiting for HDS Support to see if there is a tool for Solaris like xpinfo to dig out information from TagmaStore. Meanwhile, I made the script below, using prtvtoc - tested ...

After running JASS I can't seem to ssh from one specific host with CRT. I<br>can ssh from other hosts without problems..........<p>Any ideas as to what to check?<p>Thanks<br>

Is it possible to setup source routing from a Sun box? Thanks in adavnce,<br>

Thanks go to Robert A. Fisher for his reply - the only one. Basically Iwanted the non-X equivalent of the xev/xmodmap commands. As he suggestedloadkeys/dumpkeys will do the trick. I have created a short script whichsets the keys correctly on our KVM. Can't get the UK pound sign to beset ...

Several people said to try'xv' on www.sunfreeware.comBut I ended up using the snapshop application that comes with Sun/CDE.Right click and go to applications and the screenshot.Below is my original questionI have a Solaris 9 box and would like to take some screen shots andprint them to my ...

Hello,I was wondering about the pro's and con's of Software vs Hardware RAID onroot disks. For example the T2000's and v440's come their own onboard RAIDcontroller. What is the prefered "best practice" when setting up boot disks,Hardware or Software mirrors? I also noticed that ...

JASS configures ssh to use tcp wrappers...... You will need to edit yourhosts.allow file and change LOCAL to ALL for sshd.On 3/29/06, Paul Hunter <diggerthelab at gmail.com> wrote:>> After running JASS I can't seem to ssh from one specific host with CRT. I> can ssh from other ...

Dear all,First off can I thank everyone that responded, more specifically Iain andAaron.My issue was resolved by running the command 'eepromoutput-device=screen:r1024x768x75' as rootI ran the command from user land and waited for the nightly reboot,hey presto all works fine the next ...

Hi All, I have a doubt in shell script. In my script i m searching for 2 files in a particular directory where the script will reside.The script should check for two keywords PARTIAL, FULL. If the file exists it should start the workWith some help i had done a part, but still facing ...

I ran JASS on our Jumpstart (JET) server running Solaris 10.... Kind of newto Solaris 10... lolGetting the following errors:nfs mount: 192.168.10.20: : RPC: Program not registerednfs mount: retrying: /tmp/mntpt.3385Any suggestions as to what was disabled...... JET was working fine prior ...

Hi All, I have a Sun Enterprise 3000 server with SSA 110 Array. with #ssaadm disp c1 i get the following report SPARCstorage Array 110 Configuration (ssaadm version: 1.15 96/03/17)Controller path:/devices/sbus at 2,0/SUNW,soc at d,10000/SUNW,pln at b0000000,8a1a62:ctlr ...

Does set md:mirrored_root_flag=1 still work with Solaris 10 SVM?<br>

First off.Thank you for all of your replies, comments, suggestions andhumor, both public and private. It has been helpful, insightful and is muchappreciated. Now for the summery: My original query with a "boiled down synopsis" of your answers: 1-Who has root access in your shop? Root ...

Hi All,I have disk quotas setup on my v210 for the following file sytems whereaccounts will go./export/homea/export/homec/export/homef/export/homei/export/homem/export/homep/export/homes/export/homet/homezWhen I do a quota -v command on the /export quota accounts I getDisk quotas for ctest (uid ...

I've swapped a v490 slimline cdrom into a v240 that came without a cdrom to<br>perform an install. It appears to be getting power - the LED flashes, and<br>the CD sounds like it's spinning up, but probe-ide shows no devices.<br>

Hi All, Is this "FCX-6562-L SAN Jnic" HBA card supported on solaris 10,if so where can I get the drivers. The system on which it is V1280. Alsowe are able to see the san devices with out drivers on solaris 10 v1280,but we need to have same device name on bothe the systems with ...