Hi all ,<p>I have the sendmail looping problem ie 554 ; Too many hops.<br>Please let me know if I have enabled SmartHost, should that also be included <br>inthe DNS with a MX record. <p>Please clear me.<p>Thanks<br>Geetha Thanu<p>-<br>

Hello guru we have two E420R enterprise server and two D1000 SUn store edge mirror is created in the store edge using solstice disk suite 4.2 the state data base replica has dedicated slice in the store edge disk out of 6 replica two replica has been corrupted how do i replace back the ...

Hi all, I have recently installed an old A1000 on an E3000 running Solaris2.6 and every week I tend to get a few messages such as:Apr 4 04:50:39 ooshlpsd unix: WARNING: /sbus at 3,0/QLGC,isp at 0,10000/sd at 5,2(sd38):^M^MApr 4 04:50:39 ooshlpsd unix: Error for Command: verifyError Level: ...

Can someone please help. I need to configure sc1 and sc0 with ip addresses and I can't figure out how. Also need to assign them a floating ip address. <br> <br>Thanks<br>Lou<br>Yahoo! Small Business $15K Web Design Giveaway - Enter today<br>

Hi All,I have two interface (IP1 and IP2) on my workstationrunning solaris 8.I want to have a TCP socket (which is bound to IP1)connect to another socket (which is bound to IP2) butI want the TCP SYN packet to be sent out of interfaceIP1 and received on interface IP2. The SYN packetshould not ...

Dear Mngrs, As a new(bie) administrator i have a problem with an old Sparcstation20. After a power failure -as i guess so- the machine became unavailable to boot. Here is the screen output of it:__________Boot device :/iommv/sbus/espdma at f,400000/esp at f,800000/sd at 3,0 File and ...

Hi,We shifted our NIS Master Server from Solaris box to Red Hat Linux 9.The Solaris clients are able to bind to the Linux master server.All the other automount points are working, except for /net automountmap. If I remove the Solaris client from NIS and reboot, the /netautomount works.My NIS ...

Hello Gurus,<p>Is it possible to recover a volume (Veritas Volume Manager 3.5) if the private<br>region has been destroyed? or is it possible to recover a private region?<br>Kindly help me out.<p>Thanks,<br>Vani<br>

hi guys,i am installing Sunfire 4800 with storedge A3500 having seven FCAL disks. At the ok prompt i could see all the disk including the boot disk on storedge D240 but after installing the solaris 8 on it and i did format i could not see the disk on the array (A3500). can you pls guy try to ...

I am experiancing an odd problem when performing a jumpstart flash install. Ihave created multiple images from a 4500 and am attempting a restore onto anE6800 domain. While I have done this exact same procedure in the past, I amnow experiancing a problem after the flash images have been ...

Hello All,First, thank you for all the replied.The answer is: max I can get is 137GB due to IDE controller limitation.Model: does not matter. So I am going to get Seagate 120GB IDE. I forgot that the OS is Solaris9 version 12/03My original post was:"Hello All, I did search from the ...

Hi Gurus,I have L1000 Tape Library with one DLT Drive connected to Sun U 60running Solaris 7 and Networker Legato 5.5.1. I Added one more DLT Drivein L1000. I did following to add the Drive.Physically connected DLT Drive in Drive 1 slot.Went to LCD panel of L1000 -> operator tab -> Device ...

HiI have a solaris 9 system with the default ssh install:bash-2.05# pkginfo |grep ssh system SUNWsshcu SSH Common, (Usr)system SUNWsshdr SSH Server, (Root)system SUNWsshdu SSH Server, (Usr)system SUNWsshr SSH Client and utilities, ...

Hello,I'm trying to mirror two disks during a jumpstart setup with Solaris 904/04. The check script seems to choke on the "free" option when I use itfor slice size. Here's an example:metadb c0t0d0s5metadb c0t1d0s5partitioning explicitfilesys mirror c0t0d0s0 c0t1d0s0 3072 / ...

i have a sol9 server running Sun's sshd.i have a win2000 machine running ssh corporation's ssh client.I want a user on the win2000 machine to ssh using publickey auth from thewin2000 box to the sol9 box, without a passwd so i can run batch jobs.I know how to get this working on sol8 using ...

Within the last 2 weeks I have been seeing ttdb error messages.File Server side has the ...netISAM errors with the ttdbserverd dying.The clients are giving me the "...ttdbserverd not found on fileserver..." atapprox. same time.I found an info doc which explained how to clean it up, ...

Hi Gurus Does any body know weather an ULTRA 10 can be loaded with Three 120GB internal hard drives and a cdromI was thinking to put the first two hardisks on the first ide and the cdrom and the last hardisk on the second ide. Has any body configured an ULTRA 10 in this way?RegardsDaniel ...

Hello all,Sometime ago, I posed a question about how to get Solaris to work with ActiveDirectory. After several false starts, I finally found the answer: Microsoft'sServices for UNIX (SFU). SFU is a software suite which extends the ActiveDirectory schema, allowing various services to run out ...

Hi guys,I am busy trying to enable a serial port on a E250 by using thefollowing command "sacadm -e -p zsmon" but get the following message"Can not contact SAC". Has anybody seen this before? I cannot find anydocuments on this anywhere. This is the output from "sacadm ...

I am running my automounted shares from a Solaris 9 server.We have recently added about 20 RedHat servers that all use the same AutoFSshares as my 30 Solaris servers.When clients are on the RedHat server and are writing to files on the nfsshares there sessions lock up.If the same client is ...

Hi All,Thanks to the many people who answered me!When I jumped to the list to ask my question, I was back from work in the evening, panic'ed, exhausted and without a solution. It was great to just drop a message to the list and go to bed, and on next-day going back to the customer's site, ...

Thanks everyone.------------------------------------------------------------------------From: Simon CrowtherSubject: Re: securenets issue?Sorry to hear of your troubles, no doubt you will get lots of good advicehere on this list, But I would also advise you to post this on thesecurityfocus ...

Hello all!Here is my situation, frequently I have to replicate systems, using jumpstart/ flash install, from one machine to another, not necesssarily the same classbox. The majority of the issues I have are quite simple driver issues, butdefinatly cost me a lot of time.My idea is this, when ...

Hi,We use java on our Netra V120 Solaris 8 (07/03) system so I downloaded thelatest JDK patch cluster for Solaris 8. All good.Are there any additional recommended patches that I should be downloadingfor the Solaris 8 release (07/03), which is the latest Solaris 8, or is thisrelease as fully ...

Hi all,Does anyone have a script that they have (or know where I can find one) Ineed a script that will remotely add to a bunch of servers? I have lookedall over the place and not found one that is decient.Thanks in advance,jg===============>>>Jordan GastonUNIX ...

Greetings,I am attempting to access two solaris 8 and 9 boxes via a serialconsole. These are IA boxes with a db 9 serial interface. My goal isto have this console on a portmaster for network access to the console. I am used to linux/freebsd where one just spawns getty on theappropriate ...

This is for Sun Cluster Guru'sI have a 2 node cluster (active-passive) implementation. Presently I have a resource group q_rg. Group Name Resources ---------- --------- Resources: q_rg qdb01 oracle_rs oradb_rs oralsnr_rs q_rs autodb_rs autosys_rsNow we ...

Hi,I have WD2500PB disk and AEC-7726Q SCS-IDE bridgeconnected to Ultra 10 running Solaris 8 (Generic_108528-17)with OBP 3.19probe-scsi-all: can not find this particular driveformat: can not find this particular driveI do not want to use on-board 24-bit IDE controller. I did boot ...

Hello Sunmangers,I don't know how to change this below scenario (change the timezone) becausemy dba pinpointing this problem (failure) on automating startup for twooracle version (oracle8i&9i). So i have two problem right now 1. don't knowto change from CST to GMT display like below ...

Hi Gurus I am getting the following error while installing the recent versionof GNU 3.3.1.Could anyone help me, # ./configureConfiguring for a sparc-sun-solaris2.8 host.Created "Makefile" in /eda_tools/GCC/gcc-3.3.1 using "mh-frag"gcc: installation problem, cannot ...

Hi fellow managers,Since I'm on site for this client, I noticed a strange message happeningalmostr every day, at regular interval, looking like this in"/var/adm/messages":Apr 5 10:06:10 server01 telnetd[5845]: [ID 682499 daemon.info] ttloop: read:Not a data messageApr 5 18:07:17 ...

The initial problem was found to be the exclusion of '/etc/mnttab' from theflash archive created by flarcreate. The actual error was in the find command(see below) used to generate the '/' filesystem image. Since '/etc/mnttab' ismounted it was skipped by the find command.As a quick fix, ...

Hi All,Searched legato.com but -..........does anyone have the older legato networker pkg's version 5.5.1 forsolaris, on a public ftp, web etc ?Need these for a server migration and have lost old media, and can onlyseem to get hold of 6.1.1LGTOclntLGTOlicmLGTOman LGTOnode LGTOserv ...

Message: 3Date: Fri, 2 Apr 2004 16:02:41 -0500From: Ken Huang <khuang at brownco.com>Subject: ports for NFS...To: codeprof at codeprof.comMessage-ID: <AA34898CD1B7C74E894DA151BE7C95A54FC451 at bacbo06.brownco.com>Content-Type: text/plain; charset="big5"HI, Does anyone know ...

Hi all,<br>i need SUNWGlib as Package.<p>Is there anyone who know where to get this?<p>greetz<br>Aleks<br>

Hello,Last month I posted a question about a SUN280 that wasgetting a PCI-PBM error and crashing. A fellow admin sentme a message stating that both CPU's and motherboard hadto be replaced to fix his. However, now the it seems thatthe problem just disappeared. For a whole two weeks,it is ...

Sun ManagersThis is a little off topic, however my company are investing in a new SAN and I am looking into the possibilities, so far I have looked at:LSI (StorageTek), EMC and HPWhat I would like to know is any tips for researching a solution from people that have been through this, and also ...

I would like to put a keystroke logger in to record the activities of local<br>users. Can someone share a script or point me in the direction of an<br>application that I can install on my Sparc Solaris systems?<p>thanx in advance,<br>Ev<br>

Hi folks, sorry for the late summary.Special thanks toJose LuizDarren DunhamRoy EricksonConclusions:- The consensus is that regardless possibly some I/O issues, the process ispretty harmless, as it uses the intent log on the final steps.- I have shceduled the defrags on allfilesystems (200 Gb) ...

Since I didn't get any answer,not even the one I sent out, I assume this is something buried deeply in the information flood.:-)carl------------- Begin Forwarded Message -------------Date: Mon, 5 Apr 2004 19:07:18 -0400 (EDT)From: Carl Ma<carl_ma at scotiacapital.com>Subject: scsi disk ...

To all,<br> <br>I'm just wonder why I do not get any email from Sunmanager since last nigh.<br>I just test it. Thanks.<br> <br>The' V. Tran<br>

Message: 4Date: Fri, 2 Apr 2004 17:39:46 +0800From: "Jim Dirstein" <jim at td.iinet.net.au>Subject: NFS issues between Solaris and LinuxTo: <codeprof at codeprof.com>Cc: linuxmanagers at linuxmanagers.orgMessage-ID: <FIEOLMEEKNBJCFDKBBAICEFDCBAA.jim at ...

Does anyone know how to set default on boot from "Built-in Speaker" to "Line<br>Out"<p> <p>I can set this manually running this program after I login but I need to<br>figure out how to do this before I login so the sound is down when I login.<p> <p>Thanks<p> <p>Chris<br>

RE-POST: -----Original Message-----Sent: Tuesday, April 06, 2004 6:14 PMTo: 'codeprof at codeprof.com'Hi,I have WD2500PB disk and AEC-7726Q SCS-IDE bridgeconnected to Ultra 10 running Solaris 8 (Generic_108528-17)with OBP 3.19probe-scsi-all: can not find this particular driveformat: can not ...

Hello -Has anyone else seen problems with logadm when an entry has boththe -c and -z (-z 0) options? I'm getting errors of the sort:/usr/sbin/logadmproduced the following output:logadm: Warning: command failed: /bin/gzip /var/adm/wtmpx.0gzip: /var/adm/wtmpx.0.gz already exists; not ...

Hello GURU We have a cluster setup consisteing of two E420R and two sunstore edge D1000 array. the store edge is mirrored .in sunstore edge diskset is running for each E420R.sun cluster 2.2 is running and in E420R server O.S is solaris 6. each E420R server has two 18 gb HDD their are ...

Hi List,I have a script that I need to run that will add a bunch of pkgs to a system.I have the following problem:If I try and do a pkgadd from inside a script, the first prompt is always:package-name/package-#/all.How do you script that? I don't want to have to interact with the script. ...

Hi, I'd like to know if there is a solaris 8 command that would state ifthe system recognizes the cd/dvd drive? I have installed a dvd drive to SunFire V120 with solaris 8 running.Is there a way to make sure the dvd drive is being recognized withoutinserting a ...

This morning when I restarted our SUNBlade 100 (Solaris 8 operating system),I noticed in the /var/adm/messages file the error message:SUNW_piclenvd: pmthr thread creation failed!I do not know if this is a new development, or if this error has always beenthere, as the previous message logs have ...

thanks i did just that and my probs are fixed.Ev "Chris Denneen" <codeprof at ghos tspace.com> To <egold at fsa.com> 04/06/2004 10:32 cc ...