Aug 21 cont:Aug 21 07:43:48 C3P2 SUNW,UltraSPARC-III+: [ID 857116 kern.warning] WARNING:[AFT1] EDU Event detected by CPU0 at TL=0, errID 0x000003d7.2ca84380Aug 21 07:43:48 C3P2 AFSR 0x00000018<EDC,EDU>.000001cf AFAR0x00000000.ffe02b80Aug 21 07:43:48 C3P2 Fault_PC 0x10032674 Esynd ...

Aug 26:Aug 26 21:16:26 C3P2 SUNW,UltraSPARC-III+: [ID 904205 kern.warning] WARNING:[AFT1] UCU Event detected by CPU0 in Privileged mode at TL>0, errID0x00006d6c.f2842ca0Aug 26 21:16:26 C3P2 AFSR 0x00300628<ME,PRIV,UCC,UCU,WDU,EDU>.00000162AFAR 0x00000000.ff949570 AMBIGUOUSAug 26 ...

Aug 22:Aug 22 10:46:27 C3P2 genunix: [ID 540533 kern.notice] ^MSunOS Release 5.8Version Generic_108528-18 64-bitAug 22 10:46:27 C3P2 genunix: [ID 913631 kern.notice] Copyright 1983-2001 SunMicrosystems, Inc. All rights reserved.Aug 22 10:46:27 C3P2 genunix: [ID 678236 kern.info] Ethernet ...

Aug 23 - 25Aug 23 03:27:48 C3P2 SUNW,UltraSPARC-III+: [ID 119456 kern.warning] WARNING:[AFT1] UCU Event detected by CPU0 in Privileged mode at TL>0, errID0x000011d6.5b4b5d00Aug 23 03:27:48 C3P2 AFSR 0x00300600<ME,PRIV,UCC,UCU>.00000093 AFAR0x00000000.ff949570 AMBIGUOUSAug 23 ...

SB 150, SunPCi IIpro, Solaris 9 08/03. Installed the latest recommended patch cluster, 26/08/2003, and on reboot, I got a couple of lines on the console screen call to undefined service "alloc_virt" I've never seen this before. This wasn't logged to /var/adm/messages either ...

I have an HP USB all in one device ( Scan,Fax, Print ) with a USBinterface. I succesfully hooked it up to a SunBlade 100 under Solaris 9and used Ghostscript etc and it prints like a dream. I now want to usethe scan functions. I found Sane and the corresponding front and backends whichare all ...

Hi AllThanks for the replies.All stated that it was a DNS issue and to look at where the MX recordwas coming from.To confirm questions askedThe /etc/resolv.conf was identical on both machines and there was onlyone nameserver listed and only one MX record for the domain, so the DNSside of things ...

Hi!I am having problems with the netstat results like I show you in the next lines. The value for input packets isnegative. Is there some patch to correct this problem ?I am using Solaris 8 in an E3500 server.apollo # uname -aSunOS apollo 5.8 Generic_108528-13 sun4u sparc ...

Hello SunManagersI have problems configuring a spaceball 3Dconnexion on solaris 2.8/SB2000.The application software seems that do not read on serial port a or b.I have also tried on solaris 2.7 and 2.9 and in these cases it works.So I suppose I miss a patch.I searched on sunsolve and I didn't ...

Gurus,I am extremely wet behind the ear with openssh and am getting an errormessage when trying to start the daemon. The message is as follows: privilege separation user sshd does not existThe daemon then fails to start. Is the sshd looking for a user sshd? Ifso, what should be it's home ...

Dear all,I have BSD ftp installed. I want to give access to other users connected tothe host such that they should be able to only see and change what is insidein their home directory. They should not list and change others directoriesother than their home directory.Does anyone know how to do ...

Hi ,<p>I am using solaris 8, how can stop remote login, for root & some other<br>users.<p>how can set remote login turned off , I don't some user login directly, they<br>su to other user , like root<p>How can set up.<p>Please let me know<p>Thank you<p>Raju<br>

In summary, this ended up being a problem on the gig switch. The customer had some filtering turned on for security reasons. After all of the filters were turned off we had no problems booting off the ge interface. There was a good idea that was submitted below that might of helped, but we did ...

I'm working on getting a V880 system running with Oracle 9iR2 on Solaris 9. I've got all (or all the non-contract) patches installed, partitions set, etc. Here's a few questions though:What kernel settings should I set in /etc/system for such a system? I've got 4GB of Ram, and 3 36GB ...

Hi all,I would like any suggestions for SSL load balancing across multiple POP, IMAP and MTA servers.RegardsSri_________________________________________________________________Enter for your chance to IM with Bon Jovi, Seal, Bow Wow, or Mary J Blige using MSN Messenger ...

On one of our servers, we have a 3 way mirrored volume, with 3 way mirroredlogs. Unfortunately, when it was installed, all the volumes were on the samearray, and hence the same controller. And unfortunately, that controller has now failed, putting our disksuitemirrors all into a 'failed' ...

I have installed new file system and mounted it for users on a Solaris 8 box.Each time I go into the mounted directory and go back to the root level, itcreates a dump file. It happens only when I am using CDE but not when doingthe same from command line. Also, it happens only when moving back ...

Thank you Casper,Joe,Jichael.Here is Caper's answer for summary :The 02/02 release is the last Maintenance updates; it is a year and a halfold; since then, many pathces have been updated and new patches have beencreated; you should also intall the latest recommended and security cluster.(No ...

I've still not managed to get more than exactly 20G out of the DLT-IVdrive no matter what I try; I've tried using different tape devices,made sure the drive is set to 20G w/Compression, tried *not* specifyingthe tape type/drive in st.conf (as Sol9 natively supports the DLT4K), etc.However, ...

Hey All,I have asked a similar question to this in the past, only now I have a newspin on it.I have an E-250 with a firmware password. I have no way of contacting theadministrator of this machine, as it has changed hands several times since(s)he last touched it.I have tried booting with a valid ...

Thanks to Tom Payerle and Hichael Morton who gave the following responses:--Slacksite has some good pages on disksuite, e.g. http://www.slacksite.com/solaris/disksuite/SDSrecovery.html--replace the failed controller--same part number, same slot, sameeverything. reboot (since the instance of the ...

Dear list members,i am facing some problem related to largefiles.Environment is an NFS automounted solaris 7 machines.on one of the machines ( capricorn ) we have created a partition of 16GB which is NFS automounted. there is just one user home directoy onthis partition. there is no other ...

Hi,I am having an issue with Gigabit interface in E 4500 running Solaris 2.6. It has problem with the NFS mount Which continuoulsy gives following Errors :NFS server ukcpna1 okNFS server ukcpna2 okNFS server ukcpna2 not responding still tryingNFS server ukcpna1 not responding still tryingNFS ...

Just installed Solaris 9 4/03 on a V120 and have mirrored the two internal drives.When booting I get the following 4 WARNING messages: forceload of misc/md_trans failed forceload of misc/md_raid failed forceload of misc/md_hotspares failed forceload of misc/md_sp failedVolume Manager and the ...

Dear all,I received many replies and I will not mention names not to forgetanyone. However I will rephrase my question : This time I will ask aboutRAID 1+0 and not RAID 0+1 as it seems a better option.I have an A1000 that will be connected to an E420R. The E420R will havesome applications and ...

Hi allI have Ultra 10 m/c running with solaris 8 working fine.I have purchaseda LSI logic daul channel Pci card (53C876E). When I put that card in myUltra 10 m/c my m/c not booting & it gives errorwarning pcisyy0:ino 0X10 has been blockedwarning glm0: interrupts #0 has been ...

Hi,I have a jumpstarted and hardened (with JASS) machine running Solaris 8that has a strange "su -" problem. The box locked the root passwordafter 28 days so I was unable to gain remote access to root su-ing frommy own account. The operations staff connected a hyper-terminal to ...

I have a Netra t1 ac200 I rebooted it and it went into standby mode. I've tried the following commands without success poweronpoweroffresetcheck I even changed the power supply but still it remains in standby mode. Can any one assist Many Thanks ...

Dear Sun Managers,I've a Sun machine that is running Solaris 8. I wouldlike to know what are the ports nos that NFS uses ? Regards,Tim__________________________________Do you Yahoo!?Yahoo! SiteBuilder - Free, easy-to-use web site design ...

Sorry for being late (Summer Times!!). Credits to: - Bruntel, Mitchell L, ALABS - Jay Lessert - Crist Clark - Reggie Beavers - Hichael Morton - Tim ttg - Smith, Kevin - General consensus is to use fuser/lsof to see if ftp/rcp is using the file FEED1 or not. If not then most probably the ...

hi , I hv inherited a few Solaris boxes (Solaris 8) and I installed the latest SUNWexplo package(4.1.1) on them . However , when i try to run it ...it returns the foll error and exits ./explorer[49]: sed: not found./explorer[55]: ksh: not found./explorer[85]: cat: not found./explorer[86]: ...

Earlier this week I posted the following problem that I was having withDiskSuite, a SUN280R & a 3310 JBOD. Sorry not to have posted a SUMMARYearlier but I was only able to get access to the problem machine thismorning.> I have a problem with DiskSuite and an external 3310 JBOD array that ...

Hi all,If I have a V880 with 32GB RAM and 8 CPUs, what is the number of reads/sec that can beachieved through this machine?RegardsSrilekha_________________________________________________________________Help protect your PC: Get a free online virus scan at McAfee.com. ...

Thanks to ....John SzkudlapskiTim VillaSimon BurrGavin HarrisOk I need a slap for this one.... as I said the system was on a remotesite and the local operations staff changed the root password. Littledid I know they changed it on the wrong box!! I now have access now thatthe root password has ...

I have installed Solaris 8 on Intel 810 chipset. I have problems setting upthe color depth and audio for the system.I am not able to set the color depth of the system to 24. The best that I amable to get is just 8. The system has 4 MB of built in display memory.After referring to the patches ...

I have installed Solaris 8 on Intel 810 chipset. I have problems setting upthe color depth and audio for the system.I am not able to set the color depth of the system to 24. The best that I amable to get is just 8. The system has 4 MB of built in display memory.After referring to the patches ...

Hello,I am building a set of scripts that will collect and display performance data from our Sun servers.One of the counters I'll collect is produced by sar,like this: "/usr/bin/sar < /usr/lib/sa/sadc 1 1"This command would run every 5,10 or 20 minutes or so, output is stored in a ...

OK,Yesterday I asked this:-----> Hey All,>> I have asked a similar question to this in the past,> only now I have a new> spin on it.>>> I have an E-250 with a firmware password. I have no> way of contacting the> administrator of this machine, as it has changed> ...

Simple Question I hope.For a E3500 I have there is a failed power supply. Not being able to easilylook at the system I am trying to figure out which power supply is failed.PPS0 which is in the rear of the machine or PPS1 which is in the front forthe machine.prtdiag shows me:Detected System ...

I just loaded a Sun machine with Solaris 8 2/02. I get the followingerrors in the messages file whnever I try to print. The print server isa Sun boxAug 29 10:52:01 cad4 bsd-gw[654]: [ID 987417 lpr.error]open(dfA006cad4): File existsI loaded the latest lp patch and rebooted, made no ...

All,Sunray on 3 E420Rs running Solaris 9, fully patched. I inherited this enviroment recently and all is well except for the resolution on the Sunray applicances. When I run utxconfig I get "Error: could not connect to the admin server". Can anyone confirm which daemon has died so I ...

Hi All<p>Anyone have the Netra T1 boot patches handy? (ref in the user manual)<p>108673-04<br>108620-04<p>I do not have a login to Sunsolve at this time and could do with them<br>urgently as OpenBSD requires them to boot.<p>Thanks in advance<p>Peter<br>

Can someone point me in the correct direction for getting OpenLDAP installed onSolaris 8 for use with local (on this box) and global authentication.Eventually we plan to use LDAP for its more advanced features but originally wewant to first start using it for authentication.Any help will be ...

Hi AllAs usual resonse within minutes, thanks to Mike Kail who sent them andworked a treat.PeterOriginal Message----------------Hi AllAnyone have the Netra T1 boot patches handy? (ref in the user manual)108673-04108620-04I do not have a login to Sunsolve at this time and could do with ...

Hi,I am trying to disable broadcast messages that are sent to the screen andconsole port. I was not able to find anything specific but I was hopingsomeone could help me out. I would like to get messages to be sent still to/var/adm/messages but I don't want the messages to be outputted to the ...

I asked:> A sendmail/solaris 9 problem:> > On most of our solaris 9 machines, I have configured them to not run in> daemon mode. An outbound email message is sent straight to the mailhost> and is processed there. The only difference between this implementation> and the ...

I am getting this error when I try to add some jukeboxs to networker. I run jbconfig select option 2, it finds the jukeboxs, I select the jukebox , it finds the devices. Then I get this errorjbconfig: SYSTEM error: '', No such file or directoryI am running networker 7.0 , Solaris 8.-- ...

I was wondering over a few issues. It will be great if the sun gurus throwsome light here.1. Can fragmentation of the used space and the free space on thedisks affect performance. If yes1.1) t owhat extent.1.2) How t odetect that the disk is fragmented a lot?2. Can we defragment the disks which ...

Many thanks to all those who replied.The consensus is that the messages are benign and normal, a result of the system onlyusing mirrors and not being configured for metatrans, raid5, hotspares, and soft partitions.They come from lines in the /etc/system file. It is not recommended to edit ...

Hi Managers,What does :-Aug 29 22:06:15 brscs02 unix: NOTICE: Scheduling clearing of error on page0x00000001.e0a84000Aug 29 22:06:15 brscs02 unix: WARNING: [AFT1] initiating reboot due to aboveerrINIT: New run level: 6The system is coming down. Please wait.System services are now being ...