Hi All, I have a Sparc5 with a 2G disk in it. It boots fine whether Ihave it on either SCA slot (SCSI id's 1 or 3):ok probe-scsi-all/iommu at 0,10000000/sbus at 0,10001000/espdma at 5,8400000/esp at 5,8800000Target 1 Unit 0 Disk SEAGATE ST32550W SUN2.1G041800000000 Copyright (c) ...

Hi all,I have a Storagetek Tape Libraray L180 with IBM Ultrium LTO tape driveswhich are connected through a Fibre Channel bridges and a switch to Sun Firev880R server on Qlogic QLA2200 adapter. There are 4 tape drives in thelibraryI have two problems:1). I am able to see only one drive out of ...

Hi all,Having problem with I try to compile OpenSSH 3.4.The system is running Solaris 8. Previously OpenSSL 0.9.6c, OpenSSH 3.1 wascompiled and installed.I did the followings before running `./configure`: export PATH=/usr/local/bin:/usr/bin:/usr/sbin:/usr/ccs/bin:/usr/xpg4/bin export ...

Hi, all,Sorry,I did not mention the hardware.Both of my Solaris8 box are Netra T1 AC200 Server with a Serial A/LOM portand Serial B port. They have no 9-pin or 25-pin D-type port. My question is how to connect the two Serial A/LOM ports or two SerialB ports in order to use KSLD. Any suggestion ...

An embedded and charset-unspecified text was scrubbed...<br>Name: not available<br>Url: <A HREF="../attachments/20020628/5c3e67b7/attachment.ksh"> http://www.codeprof.com/pipermail/codeprof/attachments/20020628/5c3e67b7/attachment.ksh</A>

hi managers..i have some problem here and need solution fast. i cannot ufsrestore file (maybe big file) from tape to disk.disk if my df -k outputFilesystem kbytes used avail capacity Mounted on/dev/md/dsk/d0 288603 93254 166489 36% //dev/md/dsk/d6 2056211 ...

Gurus,Quick question for anyone with experience of cdrw command. I have a Blade 100Sol8 box with a Plextor PX-S88TU CDRW attached via USB. The cdrw command seemsto communicate great and recognises the Plextor but when I try and write aniso image to the cd it hangs after 6% and will not finish ...

Greetings!!!Platform: Sun SolarisOS: Solaris 8Apps: Netscape Directory Server 4.13I've knew this is not related on the mailing list of Sun Managers, but Ijust want to seek for a help from you guys if you wanted too.My question is how can I modifying/add an entry in Netscape Console ofNetscape ...

Date:4.28.'02.Hi!Has anyone been successful in implementing RBAC?I hadadded the required roles to /etc/user_attr file andtried performing actions based on roles, to no avail.Ido not know where am I going wrong? What else shouldbe done to make a user don a specific role?Foll is the ...

Thank toLHERCAUD at bouyguestelecom.frPierre Zimmermann <Pierre.Zimmermann at tecnomen.fi>Here is the answerI renamed S99dtlogin to s99dtlogin. now i am getting command login. Then iadded a script /usr/openwin/bin/X :0 -query <NFSserver IP> as S99direct in/etc/rc2.d . Now client ...

dear managersrecently i download solaris 9 OE image files in to my pc. there are 3 imagefiles all with 330mb file size. After i downloaded in to my PC there was nofile extension. I don't know how to burn in to CD. Any body had sucess?Balamurugan.TNetwork EngineerIndiaEmail:-bthangam at ...

I am having a problem with my Iplanet server. I installed it a few months ago and never had any issues. I had to re boot the unix server earlier this week and now it does seem to start. I try to execute the /usr/iplanet/servers/https-admserv/start and it comes back with ...

Hi all, I am trying to install mysql-3.23.45 from source under Solaris 7 and it's failing on the compilation at the next point:root at moylan # make...Making all in sqlmake[2]: Entering directory `/opt/mysql-3.23.45/sql'Making all in sharemake[3]: Entering directory ...

Hope this is not a duplicated post.Forgive me...===========Hi all,A few people suggested the system may be different version of SSL headerfile somewhere or try the "--with-ssl-dir=/usr/local/ssl" switchI tried the switch but it doesn't work.Did a find on crypto.h, I got this only:# ...

Hi all, I am trying to install mysql-3.23.45 from source under Solaris 7 and it's failing on the compilation at the next point:root at moylan # make...Making all in sqlmake[2]: Entering directory `/opt/mysql-3.23.45/sql'Making all in sharemake[3]: Entering directory ...

Thanks for the replies from those listed below and the vacation messagesfrom those away this week...John Martinez <john at mtbiker.net>Kevin Buterbaugh <Kevin.Buterbaugh at lifeway.com>Rick Kelly <rmk at rmkhome.com>I got a mixed set of responses, but I expected that much. The ...

Almost everyone who responded said that it is not an issue to comment outthe line in the run control script. Several people mentioned that patchescould overwrite this file. Several suggested leaving it alone and have aempty /etc/inetd.conf file or all lines commented out. Thanks to ...

Don't recognise the subject? Probably because I didn'task the question. However, Tristan Ball followed up myprevious summary about how lsof queries the kernel forthe open files, and since it's excellent information, I figured I'd share it. Thanks Tristan ...

I recently compiled and installed OpenSSH 3.4p1 on a Solaris 8 server.Although I set "X11Forwarding yes" in /usr/local/etc/sshd_config and"ForwardX11 yes" in /usr/local/etc/ssh_config I am getting a "Can't opendisplay" error when I try to start an X application on ...

Visit this link <br><A HREF=" http://wwws.sun.com/software/sundev/archive/developer/sysreq.html"> http://wwws.sun.com/software/sundev/archive/developer/sysreq.html</A><p>and check if your machine fulfill the requirements...<br>

Hi,I am trying to install Solaris 8 on a Intel 810 - P3 chipset board. I ambooting with the CD. It scans devices and asks the following :1. Interactive Installation2. Custom jump startI am choosing option 1. The system reboots and coming back to old scene.How to proceed on this ? Any suggestion ...

Hi all!!We got new Sun Blade 100 and after installation we are facing strangeproblems related to the /etc/profile and .profile not being sourced onlogin. The users have to source them manually for things to work right. Sun support says to make a linkln -s .bash_login .bash_profilethat doesnt ...

Hi folks,How to find the ip of a printer queue whithout ip entry on both DNS and /etc/hosts. lpstat -p <queue name> only tell the status. The printer is not in local, it was defined by using hppi. Thanks in advance.Walse_________________________________________________________________Join ...

Dear Managers,I am planning to add 2 4-G kits to my Blade-1000. Sun wants $9K for theirmemory(for a 4G kit). Kingston(authorized to make Sun memory is myunderstanding) is charging like $4K for 2 4G kits, though their memory isnot "sun" memory.Any good/bad experiences using non ...

Around here, on solaris 5.[678] everyone pretty much uses the dtwm(CDE) that comes on the workstations. With that, I use xterm, but ithas been pretty limited for configuring colors. BG, FG, text, cursor,etc are pretty much it. But I want to take advantage of color optionsin my mail reading ...

Hi SUN Managers,I have a brand new Netra AC200 running Solaris 8. After installation of Solaris 8, I can't seem to ping to the outside world and neither can ping to it from the outside world. Below you can see some files and outputs :# more /etc/hosts## Internet host table#127.0.0.1 ...

I want to add an internal CDROM to my Ultra2, and see two 50-pin single endedconnectors on the motherboard. Right now there is a short cable running from one50-pin connector to the other. I assume this is used to create one SCSI bus. IfIpurchase an internal 50-pin SCSI cable, do I need an ...

Hello to all,I got so many responses with very valuablesuggestions. I want to say "Thanks to all of you foryour time and your help!"First it is very sad to say that my machine gothacked, some common commands such as "ls", "find"cann't work correctly, because they ...

Hello to all,I got so many responses with very valuablesuggestions. I want to say "Thanks to all of you foryour time and your help!"It is very sad to say that my machine gothacked, some common commands such as "ls", "find"cann't work correctly, because they were ...

HiI have installed the Sun Fire 280R with Solaris 8 and recommended patchcluster and bios patches(111292-08).It has oracle 91 installed on it.Thisis my second server keeps on crashing very few hours.I get error messageslikeFatal Error PCI - PBMFatal Error CPU0Fatal Error PCI - PBM(CPM).I would ...

Hi,I have several machines that runs Solaris 6,7 or 8 on different hardware.A script is running on these machines that will rcp files between them.It runs fine for few days and the machines will hang.I can ping all these machines but I can't login to any of them using ssh,telnet, rsh, rlogin ...

I had received lot of response. Thanks to everybodyMy download manager was renamed .zip file as a empty file(ie.without extension) . I renamed that file in to .zip file and then i extracted .Once again i thank you to ...

After posting the SUMMARY Stale Schwenke indicates that the Linuxbinaries of Veritas Foundation Suite (FS/VM) is available on the sitewith the evaluation key.Here is his reply :Binaries for Linux (i386) can be found on the Veritas Site.Look for Veritas Foundation Suite (VxVm + VxFs ...

Hello,<p>I notice on some Sun boxes (SparcStation 5/10), there is an AUI and a 10BaseT <br>ethernet port side by side on the same machine.<p>Question is:<p>Can there two be used at the same time over different LAN segments (different <br>ip address/subnet)?<p>Thanks for any help.<p>ltiu<br>

Hell No. It's simply a dual connector to the same ethernet interface ( so that you don't have to bother buying an AUI transciever if you don't have one ). Thanks. for all the help.ltiuSubject: AUI and 10BaseTDate: Sat, 29 Jun 2002 22:58:36 -0700From: ltiu <ltiu at alumni.sfu.ca>To: ...

Dear Sun Managers,Please enlighten on what is meant by a Production Server? What applicationsrun on Production Server, How it is different from a Development Server? Whatapplications generally run on Development Server? will summarize.With RegardsG.Kumarguduru1 at ...

Is pipe | a form of redirect like > & < ?<p>Thanks for any help.<p>ltiu<br>

Question, is pipe a redirect?Yes and no.The conclusion is that <, >, <<, >> directs output to files or directs input from files.I (pipe) is a pipe in that it pipes(directs) output from one program to another.To play it safe, I would say(judging from all the responses) to call ...

going to install the forte 6.2 on sparc solaris2.8.(c/c++)Is it different than the sun compiler 4.1installation?. can'nt find the e-docs. got no manualsyet. any hints,..Jim Yahoo! - Official partner of 2002 FIFA World ...

Gentlefolks,<br>I have a couple of old Sparc Classics,<br>and need the media kit for Sun OS 4.<br>Any idea where I can get the install<br>CD for this ancient OS? <p>Thanks, will sumarize, but of course.<p>tim<br>

Hi all, I want to update ipv4 sun-solaris workstation to work in dual mode that is Ipv4-and-ipv6. Can anyone guide me to some document by which I can achieve this or if any one has a prior experience on it can you please provide me with a how to do list.To star with I want to test if i have ...

Guru,<br>Anybody got a document/URL that point to the differences between Solaris<br>8 SPARC/x86 from administration point of view ?<br>Like for example fdisk exists in Sol8x86 while not in sparc, /devices<br>tree of course different,........<p>Any help ?<br>Will summarize.<p>Thanks<p>Levi<br>

Experts, <p>Does anybody know what is the freeware from Sun used for netmeeting ? It is<br>used for remote display etc.<p>regards, <br>Dyah<br>

Hello Managers,Docs is module imported from Windows,I wan't remove the repository it self.cvs remove Docscvs remove: Removing Docscvs remove: in directory Docs:cvs [remove aborted]: there is no version here; do 'cvs checkout' firstI will summarize.regardsRaghu ...

Hello *,we have Solaris 8 10/01 installed on a new SUN Fire V880,after the installation I become this messages:Cannot assemble drivers for root /pci at 8,600000/SUNW,qlc at 2/fp at 0,0/disk at w21000004cf8f77bd,0:aCannot mount root on /pci at 8,600000/SUNW,qlc at 2/fp at 0,0/disk at ...

Regarding Disksuite 4.2.1 striping performance on Solaris 8 on the V880.The issue is still not resolved.Oracle DB imports seems to cause high overheads on DiskSuite. We triedeverything.Will now move the old A1000 with hardware RAID5 back and discontinue use ofDiskSuite for this customer.Sun ...

Thank you toMet Wisra and John B Balog whose are advice me for using nvcAnd David Glass (UDB) for using sunforum 3.2 (this one is really what I needin my case, thank you very much)regards, Dyah-----Original Message-----From: Dyah, Woelandari [mailto:dyahw at bp.com]Sent: Monday, July 01, 2002 ...

HI Managers, When i try to run GUI applications like acrobat & ftr tools, i amgetting this error.Also Display is not coming properly. I dont think problemwith DISPLAY CARD. Becoz other applications are running fine.XView warning: Unable to allocate control colors for colormap segment ...

Dear Managers,I've setup a sun box with sparc Solaris 8 to use it has company webserver.I've installed apache 2.0.39 compiled with ssl and ssh.I've got some problems compiling the php4 on this sun due to some missinglibs and a weird error that shows on the configure.log:configure:5980: gcc ...

Sometimes it just takes someone else to point out the forest amongst all thetrees. Darren Dunham very kindly reminded me that one can't verify amounted file system. That was indeed my only problem. And when I looked atthe script file that I had been using for several years for backups to ...