Hi Managers,I have problem in sending mails from a Solaris box. It was woking fine all these days and problem started all of a sudden. Below is the error I get when I try to send mail from Shell Prompt. I type:- trngsvr# mailx -s testmail mr.shiv at sify.comtest mail..EOTtrngsvr# dbm map ...

Thanks to all who responded.My requirement is to read Oracle backup files of Production (SystemA) fromdevelopment (SystemB).I have got quite a number of suggestions including 1. Cluster file system like Veritas -- We would not like to spend$$$ for this purpose 2. NFS -- Cannot use this as ...

Good day all! Im in a bit of a jam, and I cant find the answer on the web,so I went to where the Sun experts hang out. Coming from Linux, I got realused to a tool called Minicom. I recently set up a solaris 8 server at aclient 4 hours away, using my linux laptop and minicom as the ...

Managers,I will be the first to admit that I am not a guru when it comes toYP/NIS, and I would like to ask a hopefully simple question.I am attempting to add a new NIS client to my domain. I have modifiednsswitch.conf to use the proper compat entries for passwd and group. Iadded the proper ...

64 bit compiling a driver code and i get thesemessages(warnings).please tell me if this is ok and how i may to improveit?. ult(sol2.8).# /usr/local/bin/gcc -D_KERNEL -m64 -c csd.ccsd.c:102:9: warning: extra tokens at end of #endif directivecsd.c:176: warning: initialization from incompatible ...

Firstly thank you to all that have responded, perhaps I asked the wrongquestions really.Currently we have a E420R running Solaris 2.6, 4x450Mhz CPUs and 4Gb memory,we have a T3 attached (via fibre) to this that is setup as one raid5 lunaccross the 9 disks. This is then split via VxVM into ...

Hello, I have a Netra T1 that I think *may* have a bad ethernet port.I am unable to get the machine to sense that the second ethernet port iseven installed. A show-devs lists:/pci at 1f,0/pci at 1,1/network at 1,1As the only networking port available.A ok setenv diag-switch? truediag-switch? = ...

Thanks to -Rick WaegnerRick PlaceSteve MickelerWade StuartThe answer to question 1 is "No, there is no way to change the LEDcurrently!"The answer to question 2 is -/usr/platform/`uname -m`/sbin/prtdiagTks & Rgds,Alay.> -----Original Message-----> From: Shah, Alay> ...

Fellow Sysadmins,Just wondering if there was a command to extract the "system serial number"from the OS irrespective of the release/version of Solaris one was running.Tks & Rgds,__________________________________________________Alay ShahEnterprise Technology ServicesAllegiance ...

Hi Guru'sI'm looking for a good technical documentation for a variable to be set in/etc/system sd_max_throttle Regards Haresh G. Chandnani -- "This e-mail message may contain confidential, proprietary or legally privileged information. It should not be used by anyone who is not the ...

I have a netra that is running 2.7 and it has a corrupted ld.so.1 file onit. I hada backup of /usr/lib tarred up, and booted off cd and mounted the disk thathas/usr on it and then tarred out the good version of ld.so.1 and rebooted thebox,but I'm still getting an error message on every command ...

Hi,I had to replace SUN FCAL cards with JNI HBAs on twenty two E10,000 domainstoday. On 3 of the domains the upgrade failed, on the rest the upgradeworked fine.The three domains giving problems are doing the same thing - see below.> bootResetting...NOTE: POST level < 16: Probe & ...

Hi,I am trying to setup a print queue on a Solaris 8 V880 to print to a SCOOpenserver5.05 box. When I use admintool or printer manager to addaccess to a printer. The print job dissapears off the Solaris box butnothing comes out on the SCO box. Is their something I'm missing on theSCO end to ...

hi all,<p>one of my SunUltra30 (solaris 7) recently crashes with the following message<br>in /var/adm/messages:<p>panic[cpu0]/thread=...<br>DOM segmentation violation [seg....<p>so, what the hell is DOM?<br>any idea what causes this crashes?<p>thanks,<br>christian<br>

Hello everyone,When trying to install Sol8 on a Sunfire v100 I get the folowingmessages:Executing last command: boot net - installBoot device: /pci at 1f,0/ethernet at c File and args: - installTimeout waiting for ARP/RARP packetTimeout waiting for ARP/RARP packetTimeout waiting for ARP/RARP ...

I have a directory of soft links. These links point to various filesthroughout the system. I need to make a copy of the files through thelinks onto a hard disk. The reason I am going through the links, is thatthe links have a specific naming convention that the original files donot contain. I ...

I just got a Blade 100 base configuration a month ago. Before I got it I did read through the unofficial FAQ and found out all I could on that machine. One thing I have noticed recently is that the cpu appears to be running hot. Here are some numbers from prtdiag that I took last night at ...

I am trying to bring up the second ethernet interface on an Enterprise4500 (hereafter referred to as "foo"), and seeing some severe network performance degradation when I do.Here is how I am bringing the interface up::jmglov at foo; sudo ifconfig hme1 plumb:jmglov at foo; sudo ...

A colleague of mine has the need to start at boot an application requiringaccess to the X display (well, not quite, requires existence of the Xdisplay although it does not use it, see below for details). The thing ison Solaris 2.7 with CDE.So I placed an S99 script in /etc/rc3.d which sets the ...

My thanks to all that replied. These were:Graham WoodJay LessertEspen Skog Johan HartzenbeHichael HortonScott HowardKevin ButerbaugTony WalshDarren DunhamMike SiedelbergWade Stuartdana at dtn.comThe general concensus was that a) is not really practical, the systemwill run at the speed of the ...

Thanks to all who had replied. The command is find /path -type f -mtime +"no of days"Regards,RasanthOn Tuesday 18 June 2002 12:33, you wrote:> Hi All,> How will I list all files older than some days say one week ?> Thanks&Regards,> A.K.Rasanth> ph: 91-80-8522507 ...

I am wondering if anyone knows how I can tell which clients are bound to a particular NIS slave server or master server. I know that I could get a list of all the clients and run a script that will do a ypwhich for that each client, but I was hoping for a simpler way as there are probably 700+ ...

Okfinally found it..it was not actually a blueprint but it probably should beit was kinda written like a blueprint.this original source was ZDnet but it has changed. http://www.zdjournals.com/sun/0005/sun0051.htmA copy of the doc can be found ...

Hi all,<p>How do I set up Solaris to both display console messages on the physical<br>console (connected via serial port) and saving all messages to a<br>file.<p>Will (ofcourse) summarize.<p>With regards,<br> Petter<br>

Hello Managers,I am in need of some advice on how to go abt on aprinting solution which might sound like 'Silly'.Excuse me for that :)We recently upgraded our DUMP charecter based workstations to thin clients. As its a hospital which has100s of counters where various reports are printed, ...

I have an ultra 10 that won't power up. The fan doesn;t even spin, nothing. Is<br>this is standard power supply? Could I swap in a power supply from a 3 year<br>old PC? The power supply is a MITAC MPU 250REF<p>thanks<br>

Hi managers,I need to upgrade a box from Sol7 (11/99) to Sol 8(02/02). System volumesare controlled by Vxvm 3.1 and one volume controlled by VxFs.I plan to :- break the rootdg mirrors (vxmend off rootvol-02)- hash out vx entries for non system volumes- remove rootdev and set vxio in ...

I've got an Ultra Enterprise 250 running Solaris 7 (kernel ID106541-02). As far as I know this system has never been patched sincethe OS was first installed over 2 years ago.I am now preparing to install the latest Recommended and Security patchcluster and would be grateful for any tips anyone ...

Hi ,I have one V880 server whith x6799a HBA, fully patched, attached to aHitachi Thunder 9200's through a Brocade Silkworm 2400 SAN switch (fabricmode ). The server is unable to see the storage.the SAN switchconfiguration is good (verified by Hitachi SE). When the 9200 is directlyattach to ...

Hi all, I have Sunfire 6800 (24CPU , 49GB RAM , solari 8 2/02) in which when No. of print JObs fired increases (above 300) %sys goes to 50 to 55 and this give performance problem. I think my above config should be capable of handling this many lp processes at time.It is observed that at this ...

Hello,I need some help configuring the jni fc64-1063 sbus adapter on a sparc20machine.I get the following error on bootJun 20 12:37:34 ksparc20a krtld: [ID 151736 kern.notice] /kernel/drv/fcawsymbol ddi_model_convert_from multiply definedJun 20 12:37:35 ksparc20a fcaw: [ID 451854 kern.warning] ...

Hello everyone!I'm looking for reports and recommendations about the usage of handheldsfor the administration of Unix in general and particularly Sun machines.My Apple Powerbook is starting to grow a little bit bulky & heavy on me, soI'm looking for something different. What comes to mind ...

Hello,Anyone using the /opt/sfw/bin/gupdatedb program on Solaris 9? If I run thecommand: gupdatedb --localpaths=/usr/local it works fine. The command finishes within a few seconds (/usr/local issmall at the moment), and produces a database file in /opt/sfw/var. (Note Ihad to create ...

HiWe have an E3000 running 2.6, origianlly the internal diskswere on Controller 0; later (long back) we added a SSA toarry to it. The disks in SSA were on controller 1; laterwe decided to replaced the SSA with an A1000; so connectedan A1000; disks on A1000 were on controller 2;we copied the ...

HiI did not get any response, may be Friday effect. Anyhow, Ihave now found the answer, the control is in /dev/cfgdirectory in Solaris 8. [oritinal question below]thanks for your time.DuraiOn Fri, 21 Jun 2002, Padmanabhan Ramadurai wrote:> Hi> We have an E3000 running 2.6, origianlly the ...

An embedded and charset-unspecified text was scrubbed...<br>Name: not available<br>Url: <A HREF="../attachments/20020623/3e6352f5/attachment.ksh"> http://www.codeprof.com/pipermail/codeprof/attachments/20020623/3e6352f5/attachment.ksh</A>

Systems is E3500, Sol 2.6, Photon A5200 arrayI am adding an array to the system. For reasons to long to list here, Ineed these disks to come in as controller/targets c13t0-10.It is coming in as c11t0-10.I don't have enough HBAs to add some dummy disks as placeholders.Is there a way to force ...

Thanks to many people who responded.Most recommended looking up the following websites:Use procmail at http://www.procmail.orgThere are some spam avoidance code examples at http://www.sendmail.org Spam Prevention Early Warning System: http://www.spews.org/Spam Cop Blocking List ...

Greeting folks,I have really trouble to upgrade CPU 300MHz to CPU 450MHz.One folks suggested to install this software first, but the problem is I don't have this software and don't were to download from.(The OE CD p/n 704-7076-10 revision to support a jumpstart install. -10 revision or ...

Hi. Gurus.I have two questions to ask you.1) One of my customer wants to upgrade his SS20. It's running with informix DBMS and their custom application developed with cobol. And OS is quite old (2.5.1) My question is, is it possible to upgrade from old one to new machine with new OS ...

I'm having trouble with my on-board nic card (hme0) onan Ultra 5.ok test netInternal loopback test -- succeeded.Transceiver check -- failednet selftest failed. Return code = -1Any suggestions would be appreciated.ps. this problem started following a power outage, andI suspect that there was a ...

Archive-name: codeprof-before-postingLast Updated: $Id: before.posting,v 1.17 2002/01/10 21:21:23 jdd Exp $NOTE: This message is posted periodically to codeprof on behalf of all members of the Sunmanager's mailing list. Please read it carefully before posting. This document can be retrieved ...

hi!<br>managers<br>can ultra 10 hold 2 NIC's and can this machine be used as a router.<br>if yes how!!<p>thanx in advance<br>M.Saqib<br>

Hi, Could anybody advise whether the trunking software 1.2 is bundledwith the Quad PCI Fast Ethernet 2.2 driver? My vendor shipped me a QuadFast Ethernet 2.1 driver and this card is meant for my Sun Raydeployment. I'm trying to trunk the ports to provide BW aggregation of800Mbps ...

Hi All,<br>how will I call shell commands from java code <br>Thanks&Regards,<br>A.K.Rasanth<br>ph: 91-80-8522507 Ext 1626<p>--------------------------------------------------------------<br>Velankani Information Systems Ltd, Bangalore, India<br>

hi! managers<br>can any one pls give me the PDF for Data management exam which includes volume<br>manager and T3.<br>I would appreciate the same.<br>I plan to write the exam<br>thanx in advance<p>M.Saqib<br>

Hello Gurus,I have E250 Machine( Solaris 8 ) with two Autochangers connected ( One L20and one L40 ) having Gigabit Ethernet card ( X1141A) .This Machine is used as Storage Node( term used in Legato Networker) . Lotof people on this list must be using Legato Networker .(I am using Networker ...

Hello, I'm trying to configure SNMP to work in a more secure mode. I want toconfigure it to accept only requests from our management stations and todeny the rest. I have edited the snmpd.conf file to adjust the "managers" option. Butwhen I run the snmp agent from the script file in ...

I have installed Solaris 8 (x86) on my Intel machine as OS server with 5Diskless client. In every diskless client every time i need to use floppy toboot the client because that client doesn't have Harddisk also client takeslot of time to boot . I am using "Intel pro 10/100 Pro Ethernet ...

I need GCC 3.1, and more specifically the new libraries with GCC 3.1, tocompile apache 1.3.26. The problem is that I can't get GCC 3.1 to compilefrom source using GCC 2.95.3 on my Sol 7 box (which is a sparc 20), and thepre-compiled packages on sunfreeware.com are too big even though I still ...