Hi all,I am running Solaris 8 operating system and trying to connect to WindowsTerminal server via PPP but the connection times out and I am getting thefollowing message in asppp.log file. Any help will be kindly appreciated.1:57:37 000100 ipdptp0 ppp_diag: [ID 777013 kern.debug] RECEIVE PPP ...
#device device mount FS fsck mount mount#to mount to fsck point type pass at boot options#fd - /dev/fd fd - no -/proc - /proc proc - no -/dev/md/dsk/d0 /dev/md/rdsk/d0 / ...
> Change "no" in the mount at boot column to "yes". Rocket science it ain't.Quite correct. Skipped my morning coffee, and it's had a bad effecton me all day. Thanks to all who replied to point out my mistake.Sending this out soon to cut short the belittling. :)I forgot ...
Solution: replaced the controllerMy thanks to Cathy L. Smith, Nick Hindley, Stan Pietkiewicz, 'Mike's List', JohnBeaulieu, and Andrew Rotramel.Here is the original question followed by the suggestions:I have an E450 (5.6 Generic_105181-28 sun4u sparc SUNW,Ultra-4) witheight disks. Over the ...
Pls. ignore this is just a test.--Lito A. LampitocFoundation for Communication Initiatives phone:+63(2)8941345CodeWAN Project http://www.codewan.com.ph--"If you think you're good, you're not."Received: from ohno.mrbill.net (identd at ohno.mrbill.net [207.200.6.75]) by ...
--<br>Lito A. Lampitoc<br>Foundation for Communication Initiatives phone:+63(2)8941345<br>CodeWAN Project <A HREF=" http://www.codewan.com.ph/default.htm"> http://www.codewan.com.ph</A><br>--<br>"If you think you're good, you're not."<br>
Hi all,Has anyone installed modem on sparc station 10 system ? Imran Australia Post is committed to providing our customers with excellent service. If we can assist you in any way please either telephone 13 13 18 or visit our website www.auspost.com.au.CAUTIONThis e-mail and any files ...
Hi,<br>I set the correct permission to admintool but after a few minutes it becomes<br>-r-------, only read to owner. I think an unknown service or script doing this<br>thing. But how..? how I can fix it ?<br>Could you have any idea on this.<p>bashar<br>
hello,i'm trying to configure a PPP dialin on my sol8 box, and i try to useSolaris PPP 4.0 (in fact it is pppd-2.4.0b1).When com is established, i can't ping the other maschine.On the server side, i have:% ifconfig -ahme0: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 ...
I asked for advice concerning my first ever use of `growfs' on a moderatelymission-critical filesystem. Replies were overwhelmingly positive (no pointin actually quoting them, I reckon) but salient points are: - check your backups first - expect the job to take `about as long as newfs would ...
The network installation for NetraX1 from an x86 machine was successfulwith the install server on the hard disk andmis.netra-x1.259-3836-03.zip applied. It was also needed to add the dmfe driver to the Network Install Server asthe architecture was not SPARC :add_drv -b ...
Hi,I installed solaris2.8 on sun ultra5. When I login this workstation,I take an error: coludn't set locale correctly. How can I remove this errorregardsSunOS 5.8login: seismoPassword:Last login: Wed Jan 23 11:34:45 from 10.9.1.204Sun Microsystems Inc. SunOS 5.8 Generic February ...
I know that Solaris 8 has Opengl. My question is the following:The Licence for the Opengl is runtime & development? or not!!! If not tell me the way to achieve this!(runtime and development).Thanks,Vasilis IliadisSoftware EngineerDienekis Information systems SA446 Mesogion & ...
Hello ListI hava a weired problem with a SunPCI 2 card in my new SunBlade100.The System is Solaris 8 7/01 preinstalled. Applied the two patchesmentioned in the SunPCI install guide to get the SunPCI card working.(sorry don't know the patch numbers now, but both was the newest available)no ...
I'm currently installing a E250 with 6 internal disks of each 18gb. Icreated a /, /usr, /var and swap each mirrored using Disksuite.Then I wouldlike to create a RAID-5 filesystem with Disksuite, so therefore I created 1extra slice on every disk with the same size and created the ...
Dear Sun Managers,I've a Solaris 8 machine and I want it to be able tosupport multi-asean language like Chinese. I've donea fresh Solaris 8 installation. After that, I putin the Solaris 8 language cd and install the Chinesepackages and do a reboot. However, when I select language to zh in ...
Hello admins,I've tried to build and install XFree86 on sparc and use it on Sun Rays.Build and installation was succesfull, but when I try:/usr/X11R6/bin/Xsun :7 -query appserverI get:fatal server error:keyboard type unsupported -1Is it possible to use it on Sun Rays, which have usb ...
Hello Admins,<p>Are there any recommended settings for SUN gigabit interface to work best with<br>NetApps filer? We have NIC card connected back to back to the filer.<p>Thanks in advance.<p>Hasham<br>
Hi GurusThe rm command is working as designed, however that isthe problem. The rm command allows a userid withoutwrite access to delete a file. (see man page below)The question is how can I prevent a userid withoutread or write permission from deleting a file?man rmThe rm utility removes the ...
Hi Gurus,I upgraded a Sun Ultra-1 sparc station with Solaris 7(Generic_106541-08)and after installation i am getting following error message. Sytem isgetting halted to OK prompt. Please help me out soon. Thanks,Property (boot-lessage) not supported by /platform/sun4u/kernel/unixPanic-kernel : ...
I built a solaris 8 server using 4/01 release media. I installed the latest<br>patch cluster on it. Client is saying they want to use the 7/01 release.<br>Does it make a difference? Doesn't installing the patch cluster bring the<br>older release up-to-date?<p>thanks,<p>-dave<br>
Everyone,In an effort to deploy openssh 3.0.2p2 I am experiencing problems with'making' zlib 1.1.3.I am using gcc 3.0 on a U5 running 2.8 (current patchset), my path includes/usr/ccs/bin...Here is the error (returned from make)# pwd/usr/local/src/zlib/zlib-1.1.3# iduid=0(root) gid=1(other)# ...
We have a dozen or so Ultra 5s running Solaris 2.7. Unfortunately thesystem clocks on several of the machines are consistently fast or slowby almost 1% per day, which is too much for ntpd to handle. (Ntp isonly designed to handle clock frequencies off by at most 500 parts permillion, ours are ...
We are currently using the Hitachi 5840 array for our boot device.This allows us to not encapsulate our boot disks (we use Veritas Vol Mgr), and still have a protected boot environment. Also, this allows us to use Sun's Live Upgrade product very easily (it doesn't work well withencapsulated ...
Many thanks to Casper Dik: installing the GNU binutils fixed the problem.Art MastProblem Statement--------------------------------------------------------------------------Everyone,In an effort to deploy openssh 3.0.2p2 I am experiencing problems with'making' zlib 1.1.3.I am using gcc 3.0 on ...
If I select some text in a dtterm window, hit CTRL-INS and SHIFT-INS,the text is not pasted. It'll work if I use the menu options clickedwith the mouse, or use the middle mouse button.Where can I customize these settings? == root at williams# uname -sr SunOS 5.7 == root at williams# ...
Hello All,I am looking for a sun old compiler with media and keyandeverything to buy. Do you know if that is possible andwhere i can get(buy) it from?. sun does not havethese.there is a compatibility reason i am looking forthis version of compiler.workstation is Sun Sparc Works 3.1. Need Sun ...
Well, I think almost everyone of you responded, and all that did said pretty much the samething. I am new to solaris and appriciate the help you have all offered.Thank you againShane_________________________________________________________________Join the worlds largest e-mail service with MSN ...
Can the 2.95 version of gcc make 64-bit executables for Solaris 7? I amtrying to compile lsof for 64-bit Sol7 but I get a warning when doingthis regarding gcc not being able to compile 64-bit for Sol7. Doesn'tseem correct to me but.....Thanks.-- =====================Jeff KennedyUnix ...
Hello again!Along the lines of my post from yesterday, I have an adjtime() functionquestion.What is the "exact" rate adjtime() uses to slow the clock down? The manpage in Solaris 8 says "a fraction of one percent". I'm trying to find outhow long the procedure would take.I ...
Can SunBlade100 use external firewire disk?<br>Anyone doing this? Where can I find the driver for<br>this. Thanks<br>
Trying to setup a Jumpstart server on a box and it failsevery time, during "setup_install_server" execution.Details:server= SunOS tahoma 5.8 Generic_108528-09 sun4u sparc SUNW,Ultra-60/jumpstart is a symlink to a filesystem with over 10GB free spaceCDROM image is from the 10/01 HW ...
Doh. Always check the archives.... :-)Thanks to David Foster, Jay Lessert, Mark Day, Tim Evans fortheir quick responses.--rc Rick Crelia rick at cobaltgroup.com Sr. Systems Engineer Ph: 800-909-8244 x8293 IT Hosting Cel: 206-396-9712 The Cobalt Group, Inc. ...
Hi, folksWe're running Solaris 8 (4/01) on an E250, and we have several Tektronix Xterminals that we use to log in to the E250. We're using CDE 1.4.I'm getting several "Warning" messages every time I start up a session on theE250 from the xdm chooser on the X terminals. When I ...
Greetings All -I am looking for advice on buying an environmental monitor for our serverroom. I would like to be able to monitor temperature in at least 2locations, preferably more. Monitoring power, humidity, airflow, etc.would be nice, but not necessary.Any general advice would be good, and ...
Hi techiesHow can I find the unix user who is using a TCP/IP port,say I need to knowwho is using the port 80 ( HTTP port )Using the netstat command it lists me the ports binded to the remotemachines that are accessing the unix serverThanksKPThis e-mail and any files transmitted with it are for ...
Hi gurus,<p>I have solaris 8 on e250 . I am getting Zombies . I cant reboot my machine .<br>Is there any way to get rid fo this without rebooting .<br>thanks in advance.<p>Regards<br>gurjeet<br>
Archive-name: codeprof-before-postingLast Updated: $Id: before.posting,v 1.17 2002/01/10 21:21:23 jdd Exp $NOTE: This message is posted periodically to codeprof on behalf of all members of the Sunmanager's mailing list. Please read it carefully before posting. This document can be retrieved ...
Hi, allWe've run into a bit of a problem using Sun's asppp package. We're runningSolaris 8 on an E250 and using the bundled asppp.We had been able to dial up a remote computer through asppp with no problems,but I've been asked to set up this connection so that a credit card is chargedfor ...
Whew! I had a hard time getting this mail through, anyway..Many many thanks to all those who replied namely:Thomas FrerichsZarehsudheeshHendrix VisageLars HeckingPiard, FredericSteve SandauMichael KalusJay LessertShannon.k.KelmanTim ChipmanVladDave ZNicholas TangTim Wortsystem administration ...
Thanks to :Matthew P. MarinoTim Evanscanderson1 at worldbank.comMatthew's reply to recycle the tapes worked, after I have recycled all the tapes and now the mount operation worked and backupcompletes successfully.Christian.-----Original Message-----From: Matthew P. Marino [mailto:mattm at ...
Can someone tell me waht these files contains, and when. I am told I can use<br>them to find out if a job printed ok. is this true?<p>John<br>
Hello Managers.After a long time testing the result is that this will not work.I have removed one device so that only 8 devices are on the scsi bus. Eachdevicehas an unique id but i've got a lot of scsi errors or boot failures. I thinkthat even though thescsi initiator id's are changed both ...
Hi<p> My server has 2 interfaces. What is the best choice ?<p> trunking (does it need a license ?)<br> multipathing (soalaris8)<p> Trunking and multipathing , does it work with Gigabit interface ?<p>thanks<br>Fred<br>
Hi Folks, I was wondering if anyone has used this card in a blade 100 and whattheir impressions were? is it any good? will it take the place of the NTstation i have at my desk?Regards RoyRoy WhiteInternational Fund Services Ireland Ltd Tel: +353 1 7075057Bishops Square Fax: ...
Hi gurus,Thanks a lot to all who replied with their best experiences .Here is The list of fellow's Who replied . David FosterDean McDonaldEduardo Sanchez M.Eric PriebeJerry KempOzgur C. DemirKohler BenjaminFlash WilsonKarl VogelIan D CrorieMatthew P. MarinoMike PeppardPhil BrutscheThe great ...
Is there a way to route mail from a particular host to /dev/null with<br>Sendmail? I need to allow a marketing app to run through some tests and<br>send it's emails, but I can't allow the emails to actually get sent to the<br>users...any ideas?<p>TIA...<p>Rick<br>
HiThe Solution seemed to be, to install the newewst Software for SunPCi IIavailable at http://www.sun.com/desktop/products/sunpci/sunpci_download.htmlRainer suggested to put the following two lines in the SunPC.ini, which solvedthe problem for him.[Display]OldModeThanks to Rainer, ...
Hi gurus, Thanks a lot to all who replied with their bestexperiences. I had over 50 responses so I won't tryto list everyone by name. Everyone on this list is sohelpful and quick.-----Original Message----- From: Kathy Ange [mailto:kathyange at yahoo.com] Hi Gurus The rm command is working as ...
Hi People.I need make a "change plan" in my organization to apply the Recommendedpatches in the Sun boxes. They asked me for problems that can occur and fora rollback if anything goes wrong. Any ideas what I should write? Somecommands to restore the old patch ?I have installed patches ...