Thanks for all the help apparently the st.conf file was correct

particular interest in the attached message as our networker

installation runs badly as well. I don't know if the patch helped as

ultimately it turned out the SCSI id selector on the device was broken.

Tahnks again.

Regards,

Stpehen.

S Johnston wrote:

>

> Can some confirm this is the correct entry in the /kernel/drv/st.conf

> file for this device?

>

> tape-config-list=

> "SUN DLT4000", "Quantum DLT 4000", "QDLT";

> QDLT =1,0x36,0,0xD639,4,0x80,0x81,0x82,0x83,2;

>

Don't know if you have got many reply yet, probably knowing this list.

We usually

get things the next day here in Australia.

You need to put in the patch 103857-08. It fixed all of our DLT

problems. We

use Networker and fsf would take 1 hour, now they take seconds!

I looked at the st.conf file ( the patch changed it) and it looks like:

"Quantum DLT4000", "Quantum DLT 4000", "DLT4",

DLT4 = 1,0x38,0,0xd639,4,0x80,0x80,0x80,0x81,3;

It is a "Sun" DLT.

--
Stephen Johnston Phone: +49 89 32006 443
UNIX Sysadmin Fax: +49 89 32006 380
SERCO GmbH at European Southern Observatory
Karl-Schwarzschild-Strasse 2 mailto:sjohnsto@eso.org
D-85748 Garching bei Muenchen http://www.eso.org