Install Sol2.3 on CMD,LUN=1
The question:
>I have a probplem with the CMD controller (two disks under
>the same Controller/Target. I found out that I can use
>/dev/dsk/c0t3d1s* after adding LUN=1 entries in /kernel/drv/sd.conf.
> ^
>But I have a running system on LUN=0 and I want to install a new
>system on LUN=1. Is there a way to tell the Boot-Install procedure
>from CDROM to create devices, install and configure on LUN=1 ?
The answers (all of them, by now...)
You might try setting the boot device in the EEPROM.
As far as I know, NO!!! I have a similar problem, with one of my RAID
disk systems.
I've complained about this to the SCSI lead engineer at Sun, and he was
kind enough to file (or prioritize) a "bug report" about it. It might be
changed in Solaris2.5, which is supposed to be out in the summer of '95.
-------------------------------------------
Thank you very much for your response Leif and Mark.
Andreas
